how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[Hedgerow]

I use the 5105’s mostly anymore..

But grab a big one sometimes.. lol...

 

[67L36Driver]

There is (was?) an Echo dealer on North Oak in NKC. That’s 55 miles south.

 

[moparnut88]

I use the 5105’s mostly anymore..

But grab a big one sometimes.. lol...

View attachment 265252

I’ve got one tank thru my new 572 so far. Seems to be doing real well. Curious to see how well it does after break in.


Sent from my iPhone using Tapatalk

 

[Workshop]

I use the 5105’s mostly anymore..

But grab a big one sometimes.. lol...

View attachment 265252

My 510 is the first one I grab.
I like my other two, but I find myself liking smaller ones more now.

 

[Hedgerow]

I’ve got one tank thru my new 572 so far. Seems to be doing real well. Curious to see how well it does after break in.


Sent from my iPhone using Tapatalk

I don’t have a 572..
That saw is just a little old 562.. it was the Jonny on the spot when I needed to mount the 36” bar, so it got it,. Lol..

 

[WKEND LUMBERJAK]

I use the 5105’s mostly anymore..

But grab a big one sometimes.. lol...

View attachment 265252

A @Miller Mod Saws 5105 is good till 80cc is needed then a 7900 then the horse comes out Stump broke Jonsered 2094.

 

[moparnut88]

I don’t have a 572..
That saw is just a little old 562.. it was the Jonny on the spot when I needed to mount the 36” bar, so it got it,. Lol..

Yes I just sent my 562 cylinder to be replated. Can’t wait to get it back. Air leak got it.


Sent from my iPhone using Tapatalk

 

[Hinerman]

View attachment 265236

You need a bigger shop!!!

 

[Hinerman]

So, after 6 months of not owning a saw. I started shopping around a bit. Seems like all the Husky dealers around here have packed it in. Much as it hurts to say, I might have to buy into the dark side. Not really sure I can do that.

WHAT DID YOU JUST SAY????

 

[Lurch]

Last I was in Race Brothers they were tearing down the Husky wing too. Don't know if it was to reset or remove. I'm in the odd position of having no parts or spares or anything. Maybe something with an actual dealer network/parts availability would be nice for a change. All just speculation till I crack open the wallet.

 

[Hedgerow]

Last I was in Race Brothers they were tearing down the Husky wing too. Don't know if it was to reset or remove. I'm in the odd position of having no parts or spares or anything. Maybe something with an actual dealer network/parts availability would be nice for a change. All just speculation till I crack open the wallet.

They expanded the husky area in Carthage, so probably did the same in springburg..
Though I’ve not been in there since the city overlords decided to make mask wearing mandatory..
They can *f-word off... I’ve not spent a cent in Springfield since April..

 

[Hedgerow]

A @Miller Mod Saws 5105 is good till 80cc is needed then a 7900 then the horse comes out Stump broke Jonsered 2094.

I got 2 of Carl’s 5105’s now..
And a stump broke 346
May sell the 5100s.. I’m out of wall space..
Like Thomas said, I need a bigger shop..

 

[Hedgerow]

We loaded up Ely’s pickup with ash yesterday..

It was so full, he was losing splits in the field on the way up to the barn..
Haven’t measured it, but it made quite the pile..

 

[Hinerman]

Good Morning Friends of the Scrooge Rise and shine

 

[Junkyard]

Morning all. It’s a brisk morning but at least the sun is up early enough to help motivate us . I’m headed to load a rig in Ponca City and take it down by Kiowa.

 

[Douglas Ostrander]

I slabbed a big fresh ash log the other day and the middle was already 25% moisture. If that log sat 2 years it should be really low on moisture.

 

[Douglas Ostrander]

Ran the new to me WM LT-30 today and milled some walnut. Now we need to get it all banded and on the shelf for drying. Much more to go but we made a dent. Started with the small stuff.

The one in the forefront is 16’ long. Mostly 9/4 true width boards.

Oh my why leave them 16 ft. Even with equipe they are hard to move. I have some 20ft walnut logs sitting out back. They are getting cut down. Longer means heavier! Hope your new to you mill has a hydraulic turner.

 

[hoskvarna]

Got me a toy Friday

Sent from Hoskey hilltop

 

[Hedgerow]

I slabbed a big fresh ash log the other day and the middle was already 25% moisture. If that log sat 2 years it should be really low on moisture.

What’s my target to start assembly of a table?
I will use a biscuit cutter And assemble it in sections with glue.

 

[srcarr52]

Oh my why leave them 16 ft. Even with equipe they are hard to move. I have some 20ft walnut logs sitting out back. They are getting cut down. Longer means heavier! Hope your new to you mill has a hydraulic turner.

The farm table is going to be 12-14', at 16' it leave him lots of room to cut out end splits and chose his grain.

The mill has the log deck package which has manual toe boards and a manual winch operated log turner, it made turning the 16' 24" wide log easy.