how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[67L36Driver]

View attachment 239040

Them are ‘trash your roof’ size. [emoji2960]

 

[WKEND LUMBERJAK]

View attachment 239047

Did it get the wheat?

 

[Dub11]

View attachment 239047

DAMN!

 

[rsting]

Lucky that I missed all the bad weather and got to go on my saw run. Wasn't as good on saws as I'd hoped, but I still did pretty darned good I think. Got an old poulan 43, and a really nice homelite xl 103. What I'm most happy about though is a big box of NOS Mcculloch parts, and 3 mcculloch bars, a 28, a 36, both 3/8 sprocket tip, and a 32" solid tip that's almost NOS. Pretty good trip actually.

 

[Locust Cutter]

We missed the storms! Could probably use a rain after all the wind. Wheat is ready to head out.

It's already headed out here, I was looking at the wheat next to my house yesterday. Probably a month or a bit more and I'll be running the grain cart again. Back at work tonight (2 wks on/2wks off) but likely only working Monday and Tuesday. If so, I'll be rebuilding some terraces for the neighbors while they're planting either beans or cotton over a few days next week. Also hauling off some manure for a lady down the road for $40/load, but I've only got to drive 2x miles loaded to dump, so not too bad. Normally I'd be between $50-75/per due to fuel and wear/tear. Oil may be down, but F-Rated trailer tires still aren't inexpensive. Better than big tractor tires though!!

On a better note, my 9010 sold, so I'm going to have Kevin of XS saws port my 562 and 550. Dad still intends to buy a new 395 from Randy in the next year, so we'll see about that. Then we'll have to decide if we're keeping the 660 and the Stumpbroke 372, or not. We're not hurting either way, I just don't really want equipment simply sitting, as s-word breaks sitting still....

 

[Hedgerow]

Did it get the wheat?

Mine seems in good shape.
The wheat 2 miles south is beat up pretty bad..

But so is the hay fields. Laid right over.

 

[Hedgerow]

Them are ‘trash your roof’ size. [emoji2960]

Siding too..

 

[Louie B]

Is that a neighbor?
Quite a stack of hail in front of the garage door.

 

[Locust Cutter]

View attachment 239131

Siding too..

You see that too' often in the Midwest, and it never gets easier. I truly hope that She had insurance with a decent company. The hail we had at the house, when the little F1-F2 twister dropped in my back yard, took out the roofs on the house and barn, destroyed the siding on the West and North sides of the house, took out 12 trees, and left baseball sized dents in the top of 2 late seventies/early eighties 7-series BMWs, and those actually had darn good steel in them. Just destroyed them. All in all, I got off pretty lucky. The two were going to become 1 good running car for a work vehicle, but not after that. the glass, and moon roofs were also destroyed...

Morning all! Sprinkling here a bit, but the wheat could use a drink locally.

 

[rsting]

Morning everybody. Supposed to be more bad weather today, so watch out for it.

 

[Hedgerow]

Is that a neighbor?
Quite a stack of hail in front of the garage door.

That was just south of 96

They got it worse than us.

 

[Semotony]

Forecaster for St. Louis area predicts everything but snow is possible starting with rain early this afternoon down 44. But the variety of stuff is over the next several days including more hail , tornadoes, bad winds. And James left a mess I get to clean up lol

 

[Workshop]

Morning everybody .

I got my RV generator mounted up on my 14 ft flat bed trailer over the weekend. That thing is heavy. Had to use the engine hoist to pick it up.

 

[Hinerman]

That was just south of 96

They got it worse than us.

Would that size hail kill livestock?

 

[Cat 525]

Good morning! Our turn for the hail! Covered the ground a bit ago!

 

[Hinerman]

anybody have any insight on the aftermarket nylon air filters versus the OEM felt filters for the 346?

Also, need a source for 346 muffler bolts. Lost them both somehow. HL supply is out of stock. CCC does not have any either. I found some on ebay if I have to go that route.

 

[Cat 525]

anybody have any insight on the aftermarket nylon air filters versus the OEM felt filters for the 346?

Also, need a source for 346 muffler bolts. Lost them both somehow. HL supply is out of stock. CCC does not have any either. I found some on ebay if I have to go that route.

Those nylon filters sure seem to let more fines through. Least in my experience with em!

 

[Hedgerow]

Would that size hail kill livestock?

Not normally.
Just beats the crap out of them.

 

[67L36Driver]

anybody have any insight on the aftermarket nylon air filters versus the OEM felt filters for the 346?

Also, need a source for 346 muffler bolts. Lost them both somehow. HL supply is out of stock. CCC does not have any either. I found some on ebay if I have to go that route.

My local Ace Hardware is the place for Chainsaw fasteners. [emoji106]

Wonderful six aisles of misc bits.

[emoji16]

 

[MACHINE]

My local Ace Hardware is the place for Chainsaw fasteners. [emoji106]

Wonderful six aisles of misc bits.

[emoji16]

Ours here has all kinds, springs, nylon nuts and bolts , chrome

Sent from my SM-G955U using Tapatalk