how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[moparnut88]

Morning men hope all is well. Back to the grind. It’s my Monday. Kinda liking this 3 day work week they’ve got us on right now. Here’s some pics of some D6 cats I brought back Monday after dropping of that d7. These will def be a project.

Sent from my iPhone using Tapatalk

 

[67L36Driver]

Morning midlanders!

Run back down to Jeff’s Small engines to get the MS250 bar adjuster I left on the desk. [emoji21]

That and see if the Snap On guy can fix my old ratchet. [emoji1696]

 

[Workshop]

Morning everybody.

 

[Hedgerow]

Uphill fight all the way but runs and cuts..
View attachment 238412

originally straight gassed and then robbed of parts. [emoji57]

View attachment 238413

set it up with .0325" x 16". More cutters engaged in the wood than 3/8" LP.

Should have left it in the loft at Jack Horners. [emoji21]

A 250 should rock and roll with 16" of .325 chain Carl.
If it don't perform real well, something is amiss..

 

[67L36Driver]

Neighbor lady dropped off a MS170. [emoji57]

Only two years old and it needs work already.[emoji2955]

Dump fuel out of it first. [emoji106]

 

[MACHINE]

A 250 should rock and roll with 16" of .325 chain Carl.
If it don't perform real well, something is amiss..

Chg sprocket and put ms170 bar and chain..
Cuts like I've never seen

Sent from my SM-G955U using Tapatalk

 

[Junkyard]

Morning men hope all is well. Back to the grind. It’s my Monday. Kinda liking this 3 day work week they’ve got us on right now. Here’s some pics of some D6 cats I brought back Monday after dropping of that d7. These will def be a project.

Sent from my iPhone using Tapatalk

Those 8U prefix? I know where two very complete machines are. Last offer he made me was $3,500 for the pair.

 

[moparnut88]

Those 8U prefix? I know where two very complete machines are. Last offer he made me was $3,500 for the pair.

These are 9u both have oil clutches. Would like a d6b engine with turbo. I’ve gotta swap transmission and hydraulic over to the one with blade. Under carriage is prlly better than 85%. Gonna need more parts for sure. Prlly be a winter project.


Sent from my iPhone using Tapatalk

 

[Junkyard]

These are 9u both have oil clutches. Would like a d6b engine with turbo. I’ve gotta swap transmission and hydraulic over to the one with blade. Under carriage is prlly better than 85%. Gonna need more parts for sure. Prlly be a winter project.


Sent from my iPhone using Tapatalk

If memory serves he had an 8U and a 9U. One was cable blade and one was hydraulic. If scrap was high I’d say they’d already be melted down but I bet they’re still up in the trees.

 

[Hedgerow]

Neighbor lady dropped off a MS170. [emoji57]

Only two years old and it needs work already.[emoji2955]

Dump fuel out of it first. [emoji106]

It's the carb..

Oh, and the oiler is suspect.

 

[moparnut88]

If memory serves he had an 8U and a 9U. One was cable blade and one was hydraulic. If scrap was high I’d say they’d already be melted down but I bet they’re still up in the trees.

Get me some info on them. Where about are they located at?


Sent from my iPhone using Tapatalk

 

[Junkyard]

Get me some info on them. Where about are they located at?


Sent from my iPhone using Tapatalk

Right down the road from me in Claremore. I’ll see if I can catch him home.

 

[67L36Driver]

It's the carb..

Oh, and the oiler is suspect.

Yes. Fixed jet h&l . It will be the fifth one I’ve replaced with an adjustable carb. Getting good at drilling the handle and housing for screwdriver access. [emoji106]

Oiler works fine.

Another China based seller with a Cali PO address. [emoji90] fuggin swindlers.

 

[67L36Driver]

Actually the saw runs fine if one dinks with the choke and nurse it along for several minutes. [emoji2959]

 

[Locust Cutter]

Evening all! Got some mowing done for my Mother and a few others, helped a friend put a pool up, and then had to leave before I gave about 6 kids a good swat on the ass (none were mine). My two misbehaved a bit, but I'm amazed at the amount of disrespect, disobedience, and whiny-b-word-y attitude that parents are now tolerating out of their kids, and others'. I believe y Wife was correct, when She assessed that I'm turning into Jeff Dunham's Walter character... My two and I sat dwn and had a good come to Jesus over a few things, and I'm fairly certain that I had their un-divided attention, as they know very well when I've reached my limit.

I know that I got less whippings than I earned, and I now understand exactly why.

 

[67L36Driver]

Morning midlanders.

Attempt to syphon the old gas out of the vet today. [emoji1696]

There is about 3” of nasty in the tank.

I need a couple 5 gal cans. One for the old fuel and one to carry fresh from the connivence store.

Tractor supply should have some

What to do with 4-5 gallons of old fuel?

 

[Hedgerow]

Yes. Fixed jet h&l . It will be the fifth one I’ve replaced with an adjustable carb. Getting good at drilling the handle and housing for screwdriver access. [emoji106]

Oiler works fine.

Another China based seller with a Cali PO address. [emoji90] fuggin swindlers.

2 out of 3 of those are that way right from the dealer.

Got 3 of em in the shop right now.

 

[moparnut88]

Morning men. Got a lead on an old log skidded. Gonna try to go look at it tomorrow. All he said was it was yellow. Lol. Have a good day!


Sent from my iPhone using Tapatalk

 

[Dub11]

Morning midlanders.

Attempt to syphon the old gas out of the vet today. [emoji1696]

There is about 3” of nasty in the tank.

I need a couple 5 gal cans. One for the old fuel and one to carry fresh from the connivence store.

Tractor supply should have some

What to do with 4-5 gallons of old fuel?

I blend it with used motor oil then off to whom ever takes it for free.

 

[Workshop]

Morning everybody.