awol
Pinnacle OPE Member
- Local time
- 9:26 PM
- User ID
- 406
- Joined
- Jan 4, 2016
- Messages
- 628
- Reaction score
- 4,038
- Location
- Cabool, MO.
Magnetic starter and control unit for a three phase machine?
Magnetic starter and control unit for a three phase machine?
Komo cnc routerTelephone switch?
5 x 8 cnc flatbed router, old and crustyMagnetic starter and control unit for a three phase machine?
I work on the stuff I run mostly, I used to build customNot to burst your bubble cobey, but you should see some of the old sh*t I work on.
Relay logic Westinghouse junk. Drum machines with wood rails, ect. I guess I could
take pictures and post them but didn't think anyone would be interested. I know I'm not!
I have to put up with this stuff.
Complaint is that the tires lose traction when it's below 40 degrees. It has Supercar Summer tires on it that will crack the sidewalls if they are driven on at temps below 20 degrees.
Sent from my SM-N910V
Hasn't been much fun. He's adamant that his 650 HP car is going to be capable of Winter driving regardless of the engineers saying it shouldn't be driven at temps below 40 degrees. Been quite a handful. :-(You poor thing...............[emoji849]
Glad to see ya around Marc. Been wondering bout you since I emailed ya. Hope all is well and hard times are behind ya. JerryMarch sounds good and Seymour isn't too far; less than 2 hours. Less than an hour if the wife drives.