how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?

[teacherman]

Discus 153
Javelin 149?
Shot put 46'

I could maybe do 1/4 of that...
Good showing!


Sent from my iPhone using Tapatalk Pro

 

[teacherman]

So, here are the fruits thus far of my labors. Got the toolboxes connected, with all contact points including polyurethane roofing caulk (it’s black and pretty tough stuff), and they are sitting on a 1/8” thick rubber runner strip glued to the top rail. I plan to make another mounting rail to anchor the box in place, with 5 half-inch thick galv. Ubolts holding it down. This is close to the final appearance.

The holes are for bungee cords to hold hand tools on top.

Sent from my iPhone using Tapatalk Pro

 

[plcnut]

So, here are the fruits thus far of my labors. Got the toolboxes connected, with all contact points including polyurethane roofing caulk (it’s black and pretty tough stuff), and they are sitting on a 1/8” thick rubber runner strip glued to the top rail. I plan to make another mounting rail to anchor the box in place, with 5 half-inch thick galv. Ubolts holding it down. This is close to the final appearance.

The holes are for bungee cords to hold hand tools on top.

Sent from my iPhone using Tapatalk Pro

I like the green primer on the floor!

 

[Workshop]

So, here are the fruits thus far of my labors. Got the toolboxes connected, with all contact points including polyurethane roofing caulk (it’s black and pretty tough stuff), and they are sitting on a 1/8” thick rubber runner strip glued to the top rail. I plan to make another mounting rail to anchor the box in place, with 5 half-inch thick galv. Ubolts holding it down. This is close to the final appearance.

The holes are for bungee cords to hold hand tools on top.

Sent from my iPhone using Tapatalk Pro

Nice rig there, John .

 

[teacherman]

Nice rig there, John .

I like those self drilling TEKS screws. They seem to hold well.


Sent from my iPhone using Tapatalk Pro

 

[Homelite410]

Got my chain bench temporarily done. Thanks Matt!

 

[teacherman]

Got my chain bench temporarily done. Thanks Matt!

Looks very clean. Two grinders means no need to switch the chain direction? Genius.


Sent from my iPhone using Tapatalk Pro

 

[Homelite410]

Looks very clean. Two grinders means no need to switch the chain direction? Genius.


Sent from my iPhone using Tapatalk Pro

Left grinder is for 3/8 lo pro and .325. right is 3/8 and .404. center thing is a driver deburr grinder.

 

[rsting]

Left grinder is for 3/8 lo pro and .325. right is 3/8 and .404. center thing is a driver deburr grinder.

I haven't heard of a driver deburr grinder before. Did you buy it or make It? Could I see more pics of It?

 

[Homelite410]

I haven't heard of a driver deburr grinder before. Did you buy it or make It? Could I see more pics of It?

You can buy a commercial one but they are 400.00+ I made this one from an old pump and some harbor freight diamond tile saw wheels. It works ok for the most part.

 

[rsting]

You can buy a commercial one but they are 400.00+ I made this one from an old pump and some harbor freight diamond tile saw wheels. It works ok for the most part.

Thanks! I think I may try to make one too.

 

[Homelite410]

Might be hand for rivet grinding......

 

[Woodhore]

Discus 153
Javelin 149?
Shot put 46'

I could throw a shot put a lot further than that it would have to be downhill on a hard surface road though

 

[Dub11]

You can buy a commercial one but they are 400.00+ I made this one from an old pump and some harbor freight diamond tile saw wheels. It works ok for the most part.

Any video of it working? I just see it wanting to pull the chain.

 

[Homelite410]

Any video of it working? I just see it wanting to pull the chain.

Not of this one. I let it self feed yesterday and it did ok, like j said it works ok and I need to go to the saw shop and run the franzen to see what to change.

 

[Workshop]

Morning everybody.

 

[67L36Driver]

Morning midlanders!

 

[WKEND LUMBERJAK]

Morning men

 

[Homelite410]

Morning fellas, heading to the horse fair with the family today.

 

[teacherman]

Good morning. So, I’m feeling much better, but now the Queen is down with. UTI, just like I had last week, only a very different set of symptoms. This is very odd, neither of us having ever had one of these before. Oh well. Life goes on, and it could be a heck of a lot worse. It is really cold for April, and I need to get His Primacy out of the house so his mother can rest.

Hope your day is a good one.


Sent from my iPhone using Tapatalk Pro