Carb rebuild kits for Stihl and Husky Saws

[jmester]

Here is a helpful list for Tillotson HT SERIES CARBS. DG number are gasket kits. RK numbers are full rebuild kits.

MODEL DIAPHRAGM & GASKET SET REPAIR KIT
HT-1A DG-1HT RK-1HT
HT-2A DG-1HT RK-1HT
HT-2B DG-1HT RK-1HT
HT-3A DG-1HT RK-1HT
HT-4A DG-2HS/T RK-2HT
HT-4B DG-2HS/T RK-2HT
HT-4C DG-2HS/T RK-2HT
HT-5A DG-3HS/T RK-3HT
HT-6A DG-2HS/T RK-2HT
HT-6B DG-2HS/T RK-2HT
HT-7A DG-7HS/T RK-3HT
HT-7B DG-7HS/T RK-3HT
HT-8A DG-3HS/T RK-1HT
HT-9A DG-2HS/T RK-18HS
HT-10A DG-2HS/T RK-2HS
HT-11A DG-7HS/T RK-28HS
HT-11B DG-7HS/T RK-28HS
HT-11C DG-7HS/T RK-28HS
HT-11D DG-7HS/T RK-28HS
HT-12A DG-7HS/T RK-28HS
HT-12B DG-7HS/T RK-28HS
HT-12C DG-7HS/T RK-28HS
HT-12D DG-7HS/T RK-28HS
HT-12E DG-7HS/T RK-28HS
HT-13A N/A RK-4HT
HT-14A DG-3HS/T RK-29HS
HT-15A DG-7HS/T RK-28HS
HT-18A DG-7HS/T RK-28HS
HT-20A DG-3HS/T RK-1HT

 

[jmester]

I just went to order some carb kits for Tillotson HT series carbs to find out the RK3-HT supercedes to RK1-HT

 

[telejed]

Dolmar 9000/9010 Tillotson HS-294/295 kit # RK-34HS


Stihl MS 661 Walbro WJ-134 kit # K1-WJ walbro# 7010 871 0256 - Stihl #

I've got a zama carb in a 661. . . This may sound stupid but does that walbro kit fit the Zama 661 carb?

 

[telejed]

I've got a zama carb in a 661. . . This may sound stupid but does that walbro kit fit the Zama 661 carb?

answer is no. . .

 

[tsr1973]

jmester, If you can convert the Zama kit to Stihl part numbers I can send you a list of Zama RB kits that I need the Stihl pn for. About 30+ different kits.

Also those that is interested Zama is no longer allowed by Stihl to sell these kits through the distributors and the kits must be purchased through the local Stihl dealer which in my case they can not convert the Zama kit number to Stihl or at least they are claiming they can't.

How do I know what carburetor is on my 562 xp

 

[Stump Shot]

How do I know what carburetor is on my 562 xp

Should be etched right into the side of the carburetor body.

 

[Junk Meister]

First time I have seen this thread. Most of the time going ebay works for me after a bunch of digging and crossing over and the regular blarney.
Hopefully I can find it when I need it.