Any Chinese chainsaw and chinese parts discussion

[Leafy]

I want to say there is a stihlcylindrr of about the same bore at least that has the mounting holes only a couple mm off that could be made to fit.

 

[dirter]

Anyone ever post a link where we can find clone 3120 carb with h jet?


Just the carb*

I have the NeoTec carbs in stock with H for screw $54. They’re not sufficient for race saws but seem to do ok for work saws. I also have unlimited coils for $22. Plus shipping.

 

[Czed]

https://www.aliexpress.us/item/3256807765488172.html?src=google&pdp_npi=4%40dis%21USD%21144.41%2165.85%21%21%21%21%21%40%2112000043002743198%21ppc%21%21%21&src=google&albch=shopping&acnt=708-803-3821&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=m&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en3256807765488172&ds_e_product_merchant_id=5353172900&ds_e_product_country=US&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=19413040701&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gad_campaignid=19420347529&gbraid=0AAAAAD6I-hEyHJqqVQwuCjlwVu555CsvW&gclid=Cj0KCQjwgpzIBhCOARIsABZm7vG56VYvODovnBG4nDu9KdbV_cDdPrYHnm7IecM8QClDh0Ge96-3ML8aAqzXEALw_wcB&gatewayAdapt=glo2usa

Here's a cheap one

 

[Czed]

For some reason I've seen a bunch of reviews on the pink way saws no idea if it's actually 63cc

https://www.aliexpress.us/item/3256809838391212.html?src=google&pdp_npi=4%40dis%21USD%21283.70%2196.46%21%21%21%21%21%40%2112000050869395976%21ppc%21%21%21&src=google&albch=apprmkt&albagn=182499396&albcp=22790684061&albag=&albad=&aff_short_key=_oFgTQeV&isdl=y&aff_platform=true&traffic_server_nav=true&gad_source=1&gad_campaignid=22790686224&gbraid=0AAAAADC-j-Wz23n57enjXMNpGB7cO43I1&gclid=Cj0KCQjwgpzIBhCOARIsABZm7vGKS0dC2brxHE3fjZV9UdUuGsOQXreLRW7Px2I4wMA7IZ_HLm6wr6YaAnlWEALw_wcB&gatewayAdapt=glo2usa

 

[Leafy]

I would be shocked

 

[GMB74]

Pinkway saws have been getting good reviews. Apparently they are of above- average quality.
There have been reports of people ordering a Pinkway and getting a Chainsaw brand instead.
It is most certainly not a 63cc engine.
Not a 62cc engine either ( often marketed as one)
Not a 58cc engine ( cast into the side of the cylinder)
Most likely 45.2mm bore x 34mm stroke which calculates to slightly less than 55cc.
I have a 6200 Supmix saw that came out before the Pinkway hit the market. It's a decent (55cc) saw.