Any Chinese chainsaw and chinese parts discussion

[Czed]

It seems like you have got pretty good service out of the china bearings so far. I might just put my kit together as it comes. Then later do the big bore and maybe a bearing upgrade.

The first saw with the 50mm huztl has well over seven gallons i lost track it's my truck saw and gets the most use to much mowing lately to cut much.
The full wraps the last i checked are still on sale i like them on a saw lefty here.

 

[p61 western]

The first saw with the 50mm huztl has well over seven gallons i lost track it's my truck saw and gets the most use to much mowing lately to cut much.
The full wraps the last i checked are still on sale i like them on a saw lefty here.

One of these days I will go and check out Bailey's in person. It's about a 45 minute trip from my house. If I order something from them it's usually delivered the next day on their standard shipping. I think I will go ahead and order a full wrap in the next day or two.

 

[Poleman]

I misspoke....the cylinder is a 50mm not a closed port 48...intresting.
Terry, I do have some carbs I want to try on it just to see what difference there will be. This whole build our own saw has really appealed to me and I wanted to get on board, Czed has really done a GREAT job with his in great detail. I've been playing with a ported Husky 365 and the single jet carb like comes with this kit saw and have found it's running out of fuel on longer cuts like bucking 20 inch logs or bigger. So reading this thread and with a combination with the 365 my interest has really stirred. I think there is a LOT more in these saws than whats been showed so far. I think the carb is the major issue as you have mentioned Terry from what you've done with your saw.

 

[Czed]

I misspoke....the cylinder is a 50mm not a closed port 48...intresting.
Terry, I do have some carbs I want to try on it just to see what difference there will be. This whole build our own saw has really appealed to me and I wanted to get on board, Czed has really done a GREAT job with his in great detail. I've been playing with a ported Husky 365 and the single jet carb like comes with this kit saw and have found it's running out of fuel on longer cuts like bucking 20 inch logs or bigger. So reading this thread and with a combination with the 365 my interest has really stirred. I think there is a LOT more in these saws than whats been showed so far. I think the carb is the major issue as you have mentioned Terry from what you've done with your saw.

Thank you i was curious myself and there is so little information on these on the internet.
i wanted to know and if anyone is interested to know if they were worth their time and money.
With four examples now with no issues out of the box just a too long carb spring.
It doesn't matter to me that i upped them to 372s i used chinese part's anyway.
these are well built saws.
I'm glad the pro porter's are getting these i want to see the mods they make.
i just port my own saws unless someone asks i normally do stock rebuilds and muffler mods.

 

[Czed]

I've had over a half dozen experienced with saws guy's run mine and they have been impressed.
My friend chris said damn this isn't a saw you just pick up and run you better know what you're doing lol

 

[Czed]

You guy's can keep your high comp saws 190+ these are a *b-word to start lol
I thought my echo 590 was blown up after pulling on these 372s the last few month's it had 160 and was sooo easy to pull lol
I pulled all the chinese decomps might have to buy some oem one's.

 

[Czed]

Had trouble with a heart rot hickory center blew out layed it next to a fence pulled it out of the way with a tractor blocking now
Put about four tanks through the first saw the 50mm huztl should make it 8 gallons or a little more it cuts like it was made for hickory runs excellent lol
haven't had to adjust the carb on any of these 372s but on long cuts it needs more fuel.

 

[Czed]

 

[Czed]

Completely rotten .
That upstart chain has not been sharpened since i put it on.
I consider it equal to anyone's offering cut's smooth good chip flow post if anyone tries it
I hope it's consistant quality.

 

[p61 western]

Completely rotten .
View attachment 67420 That upstart chain has not been sharpened since i put it on.
I consider it equal to anyone's offering cut's smooth good chip flow post if anyone tries it
I hope it's consistant quality.View attachment 67415 View attachment 67416 View attachment 67417 View attachment 67418

Where did you get that upstart chain from Dave?

 

[Czed]

Where did you get that upstart chain from Dave?

Amazon is the only place i can find it 60.00 for 6 loops 4.99 ship
They have a wide selection.

 

[Czed]

Different price's for different chains and quanity.

 

[p61 western]

Amazon is the only place i can find it 60.00 for 6 loops 4.99 ship
They have a wide selection.

Anything over 72 drivers?

 

[Czed]

Anything over 72 drivers?

I couldn't find any but maybe i missed them.

 

[p61 western]

How does it file, is it comparable to Oregon chain?

 

[Czed]

How does it file, is it comparable to Oregon chain?

Never sharpened any yet when i do i will tell you edges are all still sharp on the three saws i'm running it on they have one and two pack too.

 

[p61 western]

Never sharpened any yet when i do i will tell you edges are all still sharp on the three saws i'm running it on they have one and two pack too.

I might have to get another 20" bar lol.

 

[Czed]

I'm going to email the company and see if i can buy some for my 24s

 

[p61 western]

I'm going to email the company and see if i can buy some for my 24s

It would be nice if they had 24 and 28, let me know what ya find out.

 

[tp2177]

Gonna have to order some 70dl count soon


Sent from my iPhone using Tapatalk Pro