Any Chinese chainsaw and chinese parts discussion

[Czed]

Worked up an early very nice condition mahle 371 cylinder for the fourth saw.
i'm out off meteors so i used a huztl double ring it's stamped hy as well the first saw has this piston and rings runs great good compression.
I did use the short wrist pin that came with the 365
basic just widened the exhaust and cut the ring off testing it today.

 

[Czed]

When i tear down the first saw to change out the wrist pin bearing to oem.
I will post pics of wear if any on the cylinder or piston.

 

[Czed]

It's only on it's first tank I've got it tuned fat runs much better than the bone stock 372s I've run the slight porting and quad port make a great difference doesn't have the grunt of the big bore's but it's still a very good running 372.

 

[Czed]

I will try to tach them guy's keep telling me they won't break 10.500
The first saw revs so hard it pops both air filter clips off lol

 

[Czed]

These are crap they were extra in the tool kits
The one's in the saws work perfect i thought these would be ok
They suck two were bad.
The one's in the saws are white i swap them for ngk anyway.

 

[tp2177]

Thinking about picking up a few extra call shifts and ordering me one of these kits.


Sent from my iPhone using Tapatalk Pro

 

[Czed]

Thinking about picking up a few extra call shifts and ordering me one of these kits.


Sent from my iPhone using Tapatalk Pro

Post pics if you can.
Assembled 365 251.00 shipped aliexpress
Haven't checked huztl lately.

 

[tp2177]

Post pics if you can.
Assembled 365 251.00 shipped aliexpress
Haven't checked huztl lately.

Will do huztl is 158 plus shipping. However much that is


Sent from my iPhone using Tapatalk Pro

 

[tp2177]

https://m.aliexpress.com/s/item/32296511094.html
Wonder if these are the same quality? $115 shipped that seems low even for these kits lol

Edit never mind it was showing up free shipping for a little bit then now shows $115 for shipping. That seems about right lol.
Sent from my iPhone using Tapatalk Pro

 

[Czed]

https://m.aliexpress.com/s/item/32296511094.html
Wonder if these are the same quality? $115 shipped that seems low even for these kits lol

Edit never mind it was showing up free shipping for a little bit then now shows $115 for shipping. That seems about right lol.
Sent from my iPhone using Tapatalk Pro

233.27 shipped great price
those are the ones i bought and put 372 topends on them
I've been happy with all four
Takes 10-15 day's to arrive don't know how long huztl takes.

 

[tp2177]

I'll see how my check is after this weekend on call and I may order one


Sent from my iPhone using Tapatalk Pro

 

[Czed]

Suprised to see the oem Husqvarna full wraps are still 29.99 from bailey's i'd like to know how many they sold lol

 

[Poleman]

Just received a 365 I ordered 10 days ago....right in schedule. Haven't totally looked at everything but was suprised to see a 48mm closed port cylinder. I thought and expected an open port. I did order the BB also but might go crazy with the 48mm cylinder just for fun!

 

[Czed]

Just received a 365 I ordered 10 days ago....right in schedule. Haven't totally looked at everything but was suprised to see a 48mm closed port cylinder. I thought and expected an open port. I did order the BB also but might go crazy with the 48mm cylinder just for fun!

I can help you out with open port 365s lol

 

[Czed]

Just received a 365 I ordered 10 days ago....right in schedule. Haven't totally looked at everything but was suprised to see a 48mm closed port cylinder. I thought and expected an open port. I did order the BB also but might go crazy with the 48mm cylinder just for fun!

Where did you get your's from.

 

[Poleman]

From Farmertec/hutzl...

 

[Terry Syd]

Rich, I like the BB kit on my saw, it is my workhorse for bucking. I run a 24" bar with an 8-pin. If you still have any Zamas left, it would be interesting to hear how a modded twin jet compares to the stock carb.

 

[p61 western]

When i tear down the first saw to change out the wrist pin bearing to oem.
I will post pics of wear if any on the cylinder or piston.

I'm curious to see the condition of the wrist pin bearing that came with the saw when you take it apart.

 

[Czed]

I'm curious to see the condition of the wrist pin bearing that came with the saw when you take it apart.

Will do when i buy oem bearings i will post pics.
I've spent too much lately lol
It's going to be a little while.

 

[p61 western]

Will do when i buy oem bearings i will post pics.
I've spent too much lately lol
It's going to be a little while.

It seems like you have got pretty good service out of the china bearings so far. I might just put my kit together as it comes. Then later do the big bore and maybe a bearing upgrade.