Any Chinese chainsaw and chinese parts discussion

[Stump Shot]

Found some 272's that looked nice but would have to order a minimum of 10 units. Always volume with those folks over there.

 

[Czed]

Found some 272's that looked nice but would have to order a minimum of 10 units. Always volume with those folks over there.

I will try to find the email i got a quote for 2 272 for 450 or so .

 

[Czed]

Huztl sent me a new cylinder and two piston kits. i had told them that one of the decomps wasn't tapped and they sent me these lol
I tapped the other cylinder and went ahead and ordered a big bore from huztl to try but the 50mm runs great very happy with it i will have 7 cylinders for three saws lol

 

[Czed]

The weather is bad here when i get a chance i will tear down one of the carbs my shops unheated.

 

[Czed]

Put two more tanks through it and tried out one of the all in one forester filing guides i have a pile of free 24 inch 3/8 chisel a logger gave me i chose the worst chain and three strokes on each tooth them cleaned it right up 35 degree's and 0 angle with .25 raker height works good the only pain in the ass is swapping hand file and raker file to the opposite direction when you switch from one side to the other well worth 15.00 i will have to try the stihl and pferd guides always hand filed before.

 

[Czed]

Might use the guide every fourth sharpening hand file in between.

 

[danimal]

Might get an alaskan mill plenty of good trees.

Id mill that with my noodling saw, 24" logs. Would go great in my natures comfort boiler...

 

[danimal]

Found some 272's that looked nice but would have to order a minimum of 10 units. Always volume with those folks over there.

Put me down for 1.

 

[Stump Shot]

Put me down for 1.

Eight more to go.

 

[Czed]

Eight more to go.

I was able to reach a chinese lady pretty picture too on her chat thingy she is supposed to give me a quote tomorrow i will give you the info j-k tools 272

 

[Mattyo]

What's the price for the 272 in quantity 10?

 

[Stump Shot]

What's the price for the 272 in quantity 10?

Honestly, I can not remember exactly, around $185.00. No idea what it would take to ship 10 saws. And I'm not sure if they're any good or not. Could be 10 piles of junk. Or if it would even make it over here past customs. Surely someone would peak at a crate of saws.

 

[Czed]

I've got two more 365s coming i ordered them from another supplier so I'm wondering if the same manufacturer makes them i like the first two i wouldn't think the 272s would be any less quality they have been making part's for those for a long time maybe one of the members could chime in that has experience with the 272 todd will say they are crap lol

 

[Stump Shot]

I can't even find it again on there. Lol

 

[danimal]

HLsupply should put us together
272xp kits.. He has all the parts I think...

 

[Mattyo]

Even if they had most of the parts....would be fun to have a 272 kit. Never run one.

 

[Czed]

Around here It's been a long time since i ran a 272 or even seen one 372s are everywhere seems like.

 

[danimal]

Even if they had most of the parts....would be fun to have a 272 kit. Never run one.

I ported my 272 and bumped the timing. It is a force to be reckoned with.

 

[Mattyo]

The 372 is generally regarded as an upgrade to the 272....but I'd like to see how a 272 is put together...and a cheap kit would be ideal.

 

[Czed]

I've never had any problems with my crank and it is running a heavier piston with the big bore kit. I do run 33 to 1 mix which is likely a good idea for the 372 type crankshaft.

Terry syd i finally got in the shop here's the carb it's got little chinese markings on it lol