Another chainsaw dyno...

[Nutball]

Thanks for the update, I hope for more soon.

But take your time, I have a project that needs time.

 

[Red97]

So yeh, about that update.

 

[RI Chevy]

[emoji897][emoji482]

 

[HYPERSAWS]

So yeh, about that update.

 

[Bigmac]

[emoji897][emoji482]

I’m doing that regardless of the update! In my best homer Simpson voice, mmmmm.....popcorn and beer

 

[Wolverine]

 

[sixonetonoffun]

So yeh, about that update.

You holding a dyno funeral?

 

[MustangMike]

I'm starting to feel very fortunate that I got my saw to you when I did … now if I had just selected a better opponent!!!

 

[Red97]

Decided to go with a full on electronic retrofit.

Supposed to be a much more durable load cell arrangement. Laptop software, will do the graphs on the fly.

High quality minimum requirements. Rpm, load, and a built in weather station and all.

None of the extra 500 wires/gizmo I don't need.

Should ship out monday.

 

[sixonetonoffun]

View attachment 261032

View attachment 261033

Decided to go with a full on electronic retrofit.

Supposed to be a much more durable load cell arrangement. Laptop software, will do the graphs on the fly.

High quality minimum requirements. Rpm, load, and a built in weather station and all.

None of the extra 500 wires/gizmo I don't need.

Should ship out monday.

Probably well worthwhile just in the time saved plotting graphs.

 

[Woodpecker]

Woohoo! I have a couple saws I'll bring over when you get it up and running!

 

[Red97]

Probably well worthwhile just in the time saved plotting graphs.

For sure, that was a major deciding factor.

Woohoo! I have a couple saws I'll bring over when you get it up and running!

I still have 1...

 

[cuinrearview]

Joe if you're interested in comparing I have three of the saws that were on the old setup. If you just want to press on that's cool too, I may have one or four to run on it eventually.

 

[NightRogue]

View attachment 261032

View attachment 261033

Decided to go with a full on electronic retrofit.

Supposed to be a much more durable load cell arrangement. Laptop software, will do the graphs on the fly.

High quality minimum requirements. Rpm, load, and a built in weather station and all.

None of the extra 500 wires/gizmo I don't need.

Should ship out monday.

We need to ban the saws that breaks the dyno lol
I cant wait to find out the result of 2511t 3rd recipe
Good luck bud

Sent from my INE-LX2r using Tapatalk

 

[Duane(Pa)]

I’m sure that’s a significant expense. So thanks! This is some pretty good news bc this is one of my favorite threads.

 

[TreeLife]

I’m sure that’s a significant expense. So thanks! This is some pretty good news bc this is one of my favorite threads.

One of my favorite threads by one of my favorite cats!

 

[Red97]

Joe if you're interested in comparing I have three of the saws that were on the old setup. If you just want to press on that's cool too, I may have one or four to run on it eventually.

I should be able to calibrate this new, just like the old. I have a hand full of saws here to help dial it in. But always open for a gtg.

We need to ban the saws that breaks the dyno lol
I cant wait to find out the result of 2511t 3rd recipe
Good luck bud

Sent from my INE-LX2r using Tapatalk

Yeh... this new load cell is a 250lb unit. So with the 2:1 It should handle well above the brake at 125ftlb....

Hopefully this will hold up much better, with less issues.

Me too on the 3rd 2511. Any of them really, I'm tired of cutting wood again lol

I’m sure that’s a significant expense. So thanks! This is some pretty good news bc this is one of my favorite threads.

Yeh, it don't look like much but they sure are proud of the setup...

 

[Red97]

Goodie box showed up....

 

[cuinrearview]

This thing running yet?

 

[PA Dan]

This thing running yet?

Wow Tim give the guy a minute or two to read the instructions!



So Joe... is it running yet?