026 Build for “A Dirty Old Feta”

[Wood Chopper]

This is my own 024 with a 44mm P&C and an 044 carb/boot

View attachment 164350

That's just filthy!!

 

[Duane(Pa)]

Awesome thread guys
Going to have to try that dye trick on the 462 ALFAO1 sent me

You don’t know the Powa of the Dark Side...

 

[David Young]

Just a Stihl MOFO 026 running at 15143 RPMs. Still room for more.

I don't see your chaps on so Im giving you a reminder they go over your pants not under them.

 

[RI Chevy]

Yessir. I was wondering why I got chaffed in my loins.
I'll try your way and see if that helps. Lol

 

[redline4]

Is it officially clutch drum bearing Monday, or just another Monday filled with diminished hopes?
@AlfA01

 

[Fruecrue]

Is it officially clutch drum bearing Monday, or just another Monday filled with diminished hopes?
@AlfA01

Hello, is this thing on?
HEEELLLLLLOOOOOOO!!!!!

 

[MG porting]

This is a build for @AlfA01.

For shipment savings, the jug/slug are being sent in lieu of an assembled saw. Not my usual SOP, but this is international and Dan is a great fellow.

This one is a hybrid of the racier one I recently did for DD (which never ran at Randy's) and my standard hopped up 026 worker. Dan wanted something Spicey, so we decided on this.

The jug is a late model 026 44mm decomp jug without the decomp drilled. The piston is a 246 Husky piston.

Yes, the only way to make a Stihl very fast is to add a Husky part to it. SORRY JEFF.

@RI Chevy

Has anyone tried putting a stihl slug in a husky just wondering if it would have the same affect. Lol.

 

[Deets066]

Has anyone tried putting a stihl slug in a husky just wondering if it would have the same affect. Lol.

Yeah, in some

 

[MG porting]

Yeah, in some

And what was the outcome the Huskys run better like the stihl with the Husky piston.

 

[Deets066]

And what was the outcome the Huskys run better like the stihl with the Husky piston.

Just depends on what your after

 

[MG porting]

Just depends on what your after

Well the same thing that I get out of all the stihl and clones I build a little bit power and a good amount of torque which Husqvarnas already have good torque.

 

[AlfA01]

Is it officially clutch drum bearing Monday, or just another Monday filled with diminished hopes?
@AlfA01

Yesterday was. Got all my parts and this biach is alive and kicking.

Hello, is this thing on?
HEEELLLLLLOOOOOOO!!!!!

Yeah, yeah. I may be slow, but I ain't smart. Lol.

 

[AlfA01]

Picters...

18" 3/8


20" 3/8

 

[sawtalk81]

IDK but if you stare at it, the recess where the bar nuts go, stands up and the word stihl recesses down in. Yes I’m sober as a church mouse lol

I seen it also then it was back to normal.

 

[Agent Smith]

So is there a video of this thing making some cuts? Maybe i missed it somewhere