husqvarna

Husqvarna 460 Rancher with 24" bar. $100 Off With Coupon Code 460RANCHER24 at http://www.hlsproparts.com/product-p/966-04-83-24.htm for a limited time. It's a robust all round chainsaw, ideal for demanding cutting jobs where more power is required for a longer guide bar. Equipped with X-Torq®...

Was out today cutting with my 262. Started fine cold and ran great but when I shut it down it does not want to start again until it cools. I just changed to a thicker base gasket (squish .030), the saw was hard to start when cold with the thinner gasket (squish .018), it would never pop on choke...

i bout this with the intention of fixing it and it has sat in the box since I got it, it will be shipped in the box I got it in lol. I don’t know much about it, I know that it was taken apart, presumably for something that happened to the chainbrake since it’s missing, not sure though, piston...

...for small wood. After getting my Husqvarna 460 Rancher back from Randy @Mastermind working it over, I was anxious to get out and cut with it, first task I had to do was cut a load of pecker poles up into firewood, so I figured I could get a little time on the saw. With one of my round work...

Have a ported 254. Port work done by Zoo City Saws. It's a runner...just have to many saws in this size. Everything works as it should. I was just running a 16" 3/8 setup on it but also ran a 20" before. PHO or we can work out a deal on bar and chain combo. 500 plus the ride from 49345. PayPal...

so I got a Husqvarna 350 for $100 non running as is. I thought it was a decent deal so I went ahead and picked it up. Now I've started tearing it down for a rebuild and wanted to get some opinions on what route to take I see a lot of people building them into a 346xp, I'm leaning towards this...

I have a husky 350 project I'm trying to bring back and I'm going to need a new oil tank/crank case and then a piston, but I can get that later. Looking for either new or used, but must be OEM

I have a 128 ld string trimmer and it puttered out and won't start, if I keep pulling the starter chord it sometimes backfires out of the catbeurator. This is the second issue I've had with it this summer as I have been using it for work. Should I just say screw it and buy a 525l, another brands...

I am putting up two Tsumura made bars. First is a 20" 72DL 3/8 .050 gauge Total branded reduced weight bar. Second is a 16" 60DL 3/8 .050 gauge Jonsered branded RSN bar. Neither have touched wood, the Total has been mounted. As I have put my 562XP up for sale I won't be needed these bars...

I'm looking for a husky dealer I can order some parts for, decals, Vibration Isolation springs, possibly a new clutch cover.

In order to buy your love, we are running a giveaway of a very special, popular, professional chainsaw. Read about the expensive Husqvarna Chainsaw Giveaway here. Subscribe to our channel at https://www.youtube.com/c/HLSupply "Me love you long time."

Hey guys- I'm building up a saw for a buddy and need a 3120 oil pump. I have cash or trade. thanks!

Just recieved 357 from a buddy to clean and tune. Planning to open muffler for him and replace intake clamp with metal, possibly 372 intake clamp. This saw has the auto decompression valve and wondering if anyone has deleted this on a 357xp and if they were pleased with result.. ive plugged most...

Hey Guys, I fixed up a saw I bought on the cheap with a new top end and now all I need to complete the saw is a clutch cover and chain brake assembly, the one on this saw is melted pretty good like someone ran the saw with the brake on for awhile. If anyone has one they'd be willing to part with...

Hey guys- an Arborist buddy dumped off a 575 carcass at my place last night with the instructions to get it rebuilt, or "your house will be thoroughly wrapped in toilet paper." And since it is the wet season here, I'd like to avoid that. The saw got crunched a while back so I'm looking for a...

Hey guys- I'm going to start moving some saws here. First up I have a nice pair- a 75cc 372 and a 395XP, both freshly rebuilt just before Christmas. The 372 is one I got as a project from a smashed saw. I bought the carcass locally and a lot of the parts came from buys from members here...

Hi guys, I'm a newb here and to small engines, but I have lots of experience with large engines, etc. Which is why when my 455 Rancher started dying under load, I figured what the heck, how hard can it be? Fast forward 2 months, and I'm about to lose it! with each fruitless action I moved on to...

Evening boys and girls. Firstly, apologies for crashing in with a sales post after months of absence. i'm no forum pro but i know it's bad form. So, here's the thing.... My little business has outgrown its workshop again, whilst myself and the guys have been moving stuff here and there I've...

We now stock stihl Rsl33 square. 3/8 .050 and 3/8 .063 full comp. And we still offer custom grinding on 3/8p, .325, 3/8 and .404. Thank you

Hi Guys- I'm looking to buy two things- a decent full-wrap handle for a Husky 394/395, and a copy of Jerry Beranek's book- "The Fundamentals of General Tree Work". I used to have several copies but gave them all away as gifts. Thanks much, JJ.