husqvarna

Up for sale is a brand new husky 572 looking for 950 shipped. I take PayPal or Venmo if you want buyer protection with PayPal you cover the fee. May be interested in trades for other saws. I have sold a couple saws and traded a couple on here previously.

Hello, I bought a cheap huskie 560xpg from a mate as it had stopped working, I have put an OEM carb kit into it along with several other parts which were broken (fuel lines, returns etc) and a fuel filter oh and i plugged the decomp as it was leaking. It now starts and runs, but won't idle. The...

I have a clone kit saw, Husky 372XP with a Big Bore Kit in it, Walboro Carb, 28" Forester Bar, Genuine Husqvarna Fuel & Oil lines that was sent out to be Professionally Built, Ported and Tuned. I'm noticing that there's A LOT of excessive bar oil that leaks out after I shut the saw off. I'm...

Hello all ! I need help, a saw rebuild turned nightmare. One thing after another, I’m left with a new crank case ( aftermarket from dukes) , a hyway cylinder for 288 and a Chinese crankshaft off of eBay stated for a 281,288 and 394. The original flywheel I have from the saw , which was an early...

Anyone have any interest in this stuff. I also have a bucket of small parts that goes with it and several top ends. It's all mostly 385/390xp. There is I believe one 576xp, and a set of 371/372xp cases and a gas tank. I try not to mess with husky but got a bunch in a deal. I'd trade for stihl or...

Selling 3 346’s… First is a Tree Monkey ported 2012 Ne. Sticker has peeled off, awaiting a new one. Bought this saw from @Edwad. Has an orange OE clutch cover. 207 psi compression. $800 plus shipping Second is a 1999 OE in Mint condition, saw has next to no run time, few minor scratches on the...

Does anyone have any information (website, pdf, ...etc) that helps explain the Husqvarna parts number system, for example: 725 53 45-55. This number is for a carburetor/intake elbow screw on a 2100CD. I have found on another website that this part number references to a "Mc6s 5x65", I am not...

Hello all, Brand new in the box Husqvarna 272xp with manual and tools. I have 2 of these available. They’re $850 plus shipping, powerhead only. PayPal F&F. If you have any questions please ask. Apart from “where did I get them from”, because I’m not giving up my supplier 😂 These are stock...

Hey everybody, first post, thank you all for all of the information I have learned here so far. I just bought this Husky 2101, is this spot on the piston the start of a problem, or nothing, what do you think...

Just started a new project. Husqvarna 288xp, when I received the saw I was told that there is believed to be top end issues. I found out there is indeed topend issues the threads for the spark plug are no longer existing. Hard to tell by the picture but the spark plug just pulls right out. Gonna...

Have a couple of my jonsereds missing right now. This is pretty much all the soldiers in one pic,Is there anything I should add to the collection. Before someone says some more stihl’s, just know that I am a collector of fine art.

Another good one from Mr. Carr, for the performance builds section https://opeforum.com/threads/the-scarr-husqvarna-592xp-build-thread.25433

1996 Husky 242xpg for sale. Everybody knows what these saws are so I'll let the images speak for themselves.... 15,500RPM 10.3'ishLBS and 3.1HP are the highlights. Not quite pristine but I cleaned her up as best I could and I feel it shows well enough to display in your collection, or, in turn...

Have a cylinder, g flywheel, complete coil, wrist pin bearing, wrist pin clips, set of crank seals (2 flywheel side), crank case slide plate. $150 plus the ride for everything.

This 262xp has the KS cylinder and Walbro HDA87 carb. It is completely original OEM and in mighty fine shape. Saw is located in Canada but will ship state side. Let me know if you have any questions or need more pictures. $550 USD plus shipping. Will need a zip code for shipping quote.

@Ronie This will hopefully be a joint thread with Ron and myself, as we pretty much built these saws simultaneously and detailed the builds in PM.

I'm just putting this out there as an option, not a recommendation.

Bought this saw new in 2019. I bet it only has 25+/- tanks through it...spent more time on the shelf than in the wood. Only ever run on 32:1 motul 800 2t synthetic w/ ethanol free 91 octane. Bottom of the saw still has the oem stickers....this thing is cherry. Only issue is the throttle lock...

For Sale - 390xp Some back history on the saw, it's a 2019 model and was used for about half a summer season in 2020 as a "big saw" for a local tree guy. At which point one of his men straight gassed it. It was brought to me and I replaced the top end with a new OEM P&C and inspected the bottom...

Hey guys just wondering what screw alternatives you turn to when you drop and lose one your husqvarna originals? Apparently they are made from unobtainum because i cant get one for less than $7! Thats ludicrous, there must be something other than using a ground down gib screw. Show me what...