What's on your bench?

[rattler]

Merry Christmas. Lol

Yes sir.

 

[Glock37]

2 242 , 1 044 , 1 3120 , 1 064

All blasted cleaned dried and masked ready for powder have to plug holes when i get to shop

 

[Glock37]

2 242 , 1 044 , 1 3120 , 1 064

All blasted cleaned dried and masked ready for powder have to plug holes when i get to shop

All cases at shop holes plugged and hung powdered this week some time

 

[Tor R]

Working to pick part of this 444SG year 82, gone split her and steal the PTO bearing


generator was good though, didn't expected that since it was kinda a tad dark...


And parts goes to this one (she has got brake flag now):


A tad more bending on the brake flag and it should be done, at least so far.


The only two things I've left now is fix a bolt for the top cover, and figure out a wire issue for the G system.
She is close to be a finished project now

 

[Tor R]

View attachment 96227

yours splitter is just as clean as the one I has, them Husky splitters doesn't get dirty wonder why?

2 242 , 1 044 , 1 3120 , 1 064

All blasted cleaned dried and masked ready for powder have to plug holes when i get to shop

Looking great Mike

 

[rattler]

yours splitter is just as clean as the one I has, them Husky splitters doesn't get dirty wonder why?


Looking great Mike

Looking good brother Tor.

 

[Czed]

Swapped out a 290 carb for an 046 carb dallas told me about .
My old saw sold it 5 year's ago
Very good simple upgrade definitely helped.
My fix for that control lever popping out after some wear on the pockets.
5 year's hasn't come out again.

 

[MustangMike]

I noticed a while ago they look to be interchangeable. What is the difference between a 290 carb and a 460 carb?

 

[huskihl]

I noticed a while ago they look to be interchangeable. What is the difference between a 290 carb and a 460 carb?

Venturi is a little bigger on the 044/46 carbs. I'd imagine the main jet is a lil bigger too

 

[MustangMike]

Good thing I didn't use that 029 carb on an 044 ... I was tempted!

 

[Dub11]

Swapped out a 290 carb for an 046 carb dallas told me about .
My old saw sold it 5 year's agoView attachment 96501 View attachment 96502
Very good simple upgrade definitely helped.
My fix for that control lever popping out after some wear on the pockets.
5 year's hasn't come out again.

Man with that fix on the control lever you could run a uni!

 

[Czed]

Man with that fix on the control lever you could run a uni!

Even new that damn lever popped out of it's position
Pissed me off.
Worked on dozens that didn't have that issue.

 

[Sty57]

I noticed a while ago they look to be interchangeable. What is the difference between a 290 carb and a 460 carb?

170......

 

[huskihl]

170......

BOOM

 

[brandonstclair20]

Just going to mix and match some more 1128 junk again. I took the parts inside for some pictures.

Sent from my iPhone using Tapatalk

 

[Willard]

2 242 , 1 044 , 1 3120 , 1 064

All blasted cleaned dried and masked ready for powder have to plug holes when i get to shop

Glock37, beautiful work. What's type of abrasive do you use?
I use walnut shells in mine but only clean my parts, not remove paint.

 

[Dub11]

Even new that damn lever popped out of it's position
Pissed me off.
Worked on dozens that didn't have that issue.

Stupid plastic!

 

[Onan18]

Bearings, lots of bearings.

 

[Lightning Performance]

Damn

 

[Onan18]

Damn

That is just in the last three months.