What's on your bench?

[Chainmale]

I put a side tensioner on mine and an 18".050 3/8. 7 tooth rim sprocket and Picco Super full chisel. With the muffler opened up, adjustable carb and timing advance it pulls the longer bar in 14" hardwood better than expected.

How does it go oiling an 18"?

 

[Sloughfoot]

How does it go oiling an 18"?

Noticeably drier than with the 16". Might be an issue.

 

[Sloughfoot]

Noticeably drier than with the 16". Might be an issue.

Did a few more cuts this evening. It's oiling well enough to keep the bar from getting hot in one 10" hardwood cut. Warms up cutting back to back 10" cuts. Good news is it pulled 9500 rpm in the cut with the rakers down to .035. Max rpm is around 13,500. Is drinking a lot more gas.

 

[afleetcommand]

Back sifting through the pile of junk.... and re-engaging with an old favorite chassis

 

[JKNW]

Absolute chaos. Switching jobs in the middle of completely rewiring my Jeep. Bench, welding table and home tool boxes are covered in electrical stuff. Got the Jeep mobile then I wedged the trailer in for the weekend.

Still need to buy new 120v outlets for that EB5000 on the right side of the pic and find it a new home.

 

[Maintenance Chief]

Absolute chaos. Switching jobs in the middle of completely rewiring my Jeep. Bench, welding table and home tool boxes are covered in electrical stuff. Got the Jeep mobile then I wedged the trailer in for the weekend.

Still need to buy new 120v outlets for that EB5000 on the right side of the pic and find it a new home.

View attachment 459234

Haha , I just switched jobs and my old reliable 1989xj decided to do weird electricity things! Chaos should just be expected!

 

[JKNW]

On the tailgate since the shop is full. Wheels on this MTD junker were locked up, one bushing seized on the hub. Pretty sure those two pairs of pliers are worth more than the mower.

 

[Agent Smith]

On the tailgate since the shop is full. Wheels on this MTD junker were locked up, one bushing seized on the hub. Pretty sure those two pairs of pliers are worth more than the mower.

View attachment 459274

Knipex...yeah. But they're worth every cent.

 

[pbillyi69]

the tailgate on my truck is always my work bench

 

[afleetcommand]

Adding some storage

 

[Mastermind]

Fughin chainsaws.

 

[Mastermind]

In the other building....

 

[hacskaroly]

In the other building....

You are porting a transmission???!??!!?

 

[Mastermind]

You are porting a transmission???!??!!?

Well Duh.

 

[jacktheripper]

Fughin chainsaws.View attachment 459464

I was lookin' for my slant fin 044 cylinder in there haha.

Looks like a bunch of ms500i's, ms400, ms462, and a ms660?

 

[Mastermind]

I was lookin' for my slant fin 044 cylinder in there haha.

Looks like a bunch of ms500i's, ms400, ms462, and a ms660?

Ain't quite there yet.

 

[Sloughfoot]

In the other building....

View attachment 459465

What the hell kind of shop has a hardwood floor?

 

[Squareground3691]

What the hell kind of shop has a hardwood floor?

A Mastermind

 

[Mastermind]

What the hell kind of shop has a hardwood floor?

 

[Sloughfoot]

View attachment 459482

You got custom cabinets and marble tops on order?