What's on your bench?

[Ronie]

I’m gonna skip the Dolmar for now. I’ve decided to get another old saw up, running and cutting. This will be the one. Jonsereds XF. View attachment 273364
View attachment 273365

Very cool!

 

[Moparmyway]

What are you looking to achieve?
195-200?

220-221
Whatever it takes

 

[RI Chevy]

Ahhh. Perfect! 219 no bueno, 222 too high

 

[huskyboy]

View attachment 273203

Cylinder is probably coming off again, gotta open the chamber a little

Is that a play saw Kev?

 

[Czed]

I bought this 3500 watt champion generator
17 year's ago
Power was on at my place but friend who's dad is on oxygen machine and bipap needed to borrow it their power was out three weeks
And you couldn't find a generator.
Because of storms
So nonstop three weeks and since then
Hundreds more of my own use and loaning it to people
It finally wouldn't start.
I changed the oil once a year
But no other maintenance
Original china sparkplug too.
I cleaned and got it running but went
Ahead and got a 10.00 carb off eBay
On it's way.
This thing still doesn't smoke
My neighbor has been through three 7000 watt generators since I bought this.

 

[av8or3]

I’m keeping my word. Put new fuel lines in and a repair kit for the carb. Got it to run briefly. It spit and backfired some before it quit. I’ll do the ignition tomorrow.

 

[Ronie]

Back on the bench getting a 346 cylinder, if at first you don't succeed....

 

[Ronie]

Cylinder for that 2152.

 

[av8or3]

Bummer

 

[WillG]

Yamaha EF4600 generator. Finally got the carb parts I needed. Carb back together and reinstalled and test ran. New air filter installed as well. Just need to let it sit overnight to make sure that the fuel leak is sorted, and if it is, tomorrow I'll do an extended test run and oil change.

Sent from my E6910 using Tapatalk

 

[WillG]

Checked on generator this morning before leaving for work. No more fuel leak. I'll give it a good run and oil change this afternoon.

Sent from my E6910 using Tapatalk

 

[WillG]

Did a big boy thing and spent 20k. Such an improvement in comfort, visibility and features over the 06. Test ran and changed the oil in my buddy's generator. Found it had a minor fuel drip which was just the float bowl bolt not being 100% tight.

Sent from my E6910 using Tapatalk

 

[QuickDrawSaw]

You ask "Whats on my bench?" Only the baddest little rippah to date!! I love this 250!!

 

[Leerod83]

Personally I think the 250 and 310 are the best of the non-pro saws.

 

[Likesaws]

Did a big boy thing and spent 20k. Such an improvement in comfort, visibility and features over the 06. Test ran and changed the oil in my buddy's generator. Found it had a minor fuel drip which was just the float bowl bolt not being 100% tight.

Sent from my E6910 using Tapatalk

Will just want to wish you a Merry Christmas and say thanks for the post and repair updates. I always read them and learn from your posts.
Thanks
Nice car to congratulations.

 

[WillG]

Will just want to wish you a Merry Christmas and say thanks for the post and repair updates. I always read them and learn from your posts.
Thanks
Nice car to congratulations.

Thank you! Merry Christmas to all!

Sent from my E6910 using Tapatalk

 

[Xr650jkallen]

12v cummins vacuum pump. I had a drip that was driving me crazy. Also resealing the front cover while I'm in there.

 

[Ronie]

Partner 500, it will be getting a closed port 55 cylinder but I'm going to get it in running shape and do a few cuts so I can get a before and after. I put a new fuel line on it and it fired up but has a bad bog so I'll put a kit in that 5000 carb and put that on it.

 

[Mkinslow]

Just playing around and taking a break from knife making, been running wide open with that the last month and a half or better.
Took an old busted up carpenter hatchet and started turning it into a belt/backpacking hatchet, tomahawk style. I'm in love so far, lol. Still have some refinement to do though

Sent from my SM-G892A using Tapatalk

 

[RI Chevy]

Cool. Was it a Plumb?