What's on your bench?

[Sty57]

Just text me if you wanna start off with bad habits.

LOL, I'll do that Al.

 

[Brewz]

Haha forget the degree wheel, you need loctite!

 

[Simondo]

I ran 4 stihl saws today and 1 husky
The Husky stopped cause screws came loose and fell out and I forgot to bring the magnet tray

What was the Husqvarna saw?

 

[Brewz]

394

 

[Simondo]

394

What came lose on the 394 then Brewz ...no first hand knowledge on 394 myself .

 

[spencerpaving]

250cc bikesaw on the bench getting a new pipe

Sent from my SCH-I545 using Tapatalk

 

[Brewz]

What came lose on the 394 then Brewz ...no first hand knowledge on 394 myself .

Sorry mate.
It was just the screws that hold the bottom muffler bracket to the muffler.
They have now been re-fitted with loctite

 

[Brewz]

Current bench top saw is an 036.
Mate found it at the rubbish dump, had suffered a catastrophic failure of something in the clutch area with everything in the area written off and chunks of metal stuck in the oil and goop

Gunna port it, make it go fast

 

[Sty57]

View attachment 43035 250cc bikesaw on the bench getting a new pipe

Sent from my SCH-I545 using Tapatalk

When your building bikesaws.
Is there certain engines you look for and to avoid?

 

[drf256]

View attachment 43035 250cc bikesaw on the bench getting a new pipe

Sent from my SCH-I545 using Tapatalk

Damn Brett, that's intriguing.

Do you use computer software to make your rings for the pipe?

Do u routinely backpurge when welding them up?

 

[VinceGU05]

Sorry mate.
It was just the screws that hold the bottom muffler bracket to the muffler.
They have now been re-fitted with loctite

lol I have lost the exact same screws on the same saw.

 

[Brewz]

lol I have lost the exact same screws on the same saw.

Did you forget your magnet tray too?

 

[spencerpaving]

When your building bikesaws.
Is there certain engines you look for and to avoid?

I prefer honda...parts are easy to get...I didn't build this one it's just here getting a new pipe and top handle...I do have a ktm motor here I gotta get together though

 

[spencerpaving]

Damn Brett, that's intriguing.

Do you use computer software to make your rings for the pipe?

Do u routinely backpurge when welding them up?

I use a cone program for templates. ..and fusion weld everything with a tig

 

[Tor R]

wasnt ment to be a builder, but somehow I got a part here and there and it start to be a complete saw.
Gone shave the key tonight, and find one carb, dunno if I got 98 carbs left so I may try to see how one 346 carb fit

 

[Tor R]

Haha forget the degree wheel, you need loctite!

even they need locktite its hard to dislike their shape and front handle angle, I've tryed all I could to like the orange/white ones but they just doesn't fit me.

 

[DSS]

Current bench top saw is an 036.
Mate found it at the rubbish dump, had suffered a catastrophic failure of something in the clutch area with everything in the area written off and chunks of metal stuck in the oil and goop

Gunna port it, make it go fast

View attachment 43082

I have an 034 here in exactly the same condition. Looks like the clutch flew apart and took everything from the case out with it

 

[Stump Shot]

Here's what the inside of a Mikuni VM34 carburetor looks like after sitting for five years. Chokes froze tight, one solid mass of junk. Had to order two new carbs and all new jets, air bleeds etc.

 

[Sty57]

even they need locktite its hard to dislike their shape and front handle angle, I've tryed all I could to like the orange/white ones but they just doesn't fit me.

I'm in the same boat Tor.
I never got comfortable with them.

 

[Stump Shot]

Showing my 272xp clutch cover some love today with a little paint and a sticker. Kind of a BS job, but it was kind of a BS day. Trying to organize project saws for winter and line up and order parts. Have been going about it haphazardly, part here for this or that. Time now to line 'em up and get 'em done. The line up includes...
Stihl 036/MS360 bastard for a loaner
Husqvarna 266XP for a firewood
Husqvarna 2100CD for play toy
Husqvarna 272XP for back up to this one
Husqvarna 288XP for Milling
Will see how far into the list I can get with time/money, though the parts have been piling up, always need more, never enough.