What's on your bench?

[heimannm]

Jim - take lots of fuel...



...the SP125 was on the bench in the morning to replace the impulse line, worked well all day after that.



Mark

 

[av8or3]

Jim - take lots of fuel...

View attachment 400606

...the SP125 was on the bench in the morning to replace the impulse line, worked well all day after that.

View attachment 400607

Mark

Will do. Thanks!

 

[Matt Ellerbee]

No, filter was on it, dirty, but there. Just stuck. Didn’t pay cylinder much attention since I found the crank in two pieces. Flywheel bearing is fooked also. It will be replaced with a 261 if I can talk my boss into it. Being a municipality we usually get the cheapest stuff. I am slowly trying to change that.

This got set on my desk this morning.

 

[heimannm]

A local fellow stopped by yesterday afternoon and asked me to look at his (mother's) Husqvarna 350. He thought the screw was missing from the bar adjuster because the chain jumped when he tried to use the saw.

That's a piece of the nose sprocket sticking out of the bar...





I had a new bar on hand but could only come up with a good used drum/sprocket so we fit it with a used chain and he's back in business.

Mark

 

[hacskaroly]

This got set on my desk this morning.

That is awesome, great saw! They may regret it when they can't get you to stop cutting stuff down because you are having so much fun!!

 

[hacskaroly]

A local fellow stopped by yesterday afternoon and asked me to look at his (mother's) Husqvarna 350

There is so much wrong going on there, that is painful to look at. What a waste on the chain, the drivers are shot, but there is still so much meat left on the cutters!

 

[Shane¹]

Got my new spikes and decal from @Wilhelm thanks again. Officially done now

 

[Shane¹]

Got my new spikes and decal from @Wilhelm thanks again. Officially done now

View attachment 400665

Forgot to send a shout out to @av8or3 he came in clutch on a lot of parts for this one

 

[Wilhelm]

Got my new spikes and decal from @Wilhelm thanks again. Officially done now

View attachment 400665

Used take-off spike!
New OEM decal though.

Forgot to send a shout out to @av8or3 he came in clutch on a lot of parts for this one

Sorry, I know a 7900 clutch was part of the deal but it would have affected shipping negatively!

Best saws ever, I used two of mine most of today under extremely unfavorable conditions!
Than You @Shane¹ for helping keep Dolmar alive.

 

[Wilhelm]

PS-6400 20" & PS-7900 24" , used, tortured, then checked and maintenance'd, ground chains - all ready for another day of hard work.
I love these!!!

 

[Wilhelm]

This is why I wrote "tortured".
I dulled a total of 6 chains today, one is trash.

 

[Shane¹]

Used take-off spike!
New OEM decal though.


Sorry, I know a 7900 clutch was part of the deal but it would have affected shipping negatively!

Best saws ever, I used two of mine most of today under extremely unfavorable conditions!
Than You @Shane¹ for helping keep Dolmar alive.

New to me spikes!
No worries on the clutch already sourced one and good to go!

 

[jacob j.]

Got my new spikes and decal from @Wilhelm thanks again. Officially done now

View attachment 400665

@Wilhelm is awesome - He's helped me with a bunch of stuff over the years.

 

[Wilhelm]

@Wilhelm is awesome - He's helped me with a bunch of stuff over the years.

I did?
What an A#ole am I considering it takes me years!

 

[Nate.]

My uncle brought me this 44 rancher a few months back. It’s been sitting on my shop floor since. Finally tore into it today & the thing looks almost brand new. Did a base gasket delete, a mild timing advance & removed the puddle of sticky stuff that used to be the fuel line. I almost feel bad giving this one back to him since he isn’t real easy on saws . Anyone run one of these? I’m considering offering to trade him for a husky 350.

 

[av8or3]

Off the bench and into the wood yard. Pics or it didn’t happen. Took the 500i and left the 166 at home.
That’s the homeowner, with his daddy’s small Homelite. Told me his dad cut up many trees this size with it. Hmmmm…..
Anyway it all worked out ok. No drips, runs or errors . I’m worn out. Chainsaws are only fun for about 15 min, then it becomes work.

 

[Woodslasher]

It's not on my bench yet, but my 2nd 660 got a good cleaning last night. I might start tearing it down today, but Covid's just sucked the energy right outta me the past few days.

 

[Rich Fife]

372xp BB. Stock Piston and Cylinder were cooked.

 

[Maintenance Chief]

View attachment 400818View attachment 400819View attachment 400820View attachment 400821Off the bench and into the wood yard. Pics or it didn’t happen. Took the 500i and left the 166 at home.
That’s the homeowner, with his daddy’s small Homelite. Told me his dad cut up many trees this size with it. Hmmmm…..
Anyway it all worked out ok. No drips, runs or errors . I’m worn out. Chainsaws are only fun for about 15 min, then it becomes work.

That homelite is dirty enough for a lifetime of work.
Thats one heck of a good pile of firewood!

 

[SOS Ridgerider]

@Wilhelm is awesome - He's helped me with a bunch of stuff over the years.

I can attest to that! Done a Lot of back and forth business with @Wilhelm and it’s always correct, and packed better than anything I’ve ever seen. I’ve even had the pleasure of visiting him in Croatia.