What's on your bench?

[big t double]

Sounds like he could break an anvil with a rubber mallet.

Yep. And that's why we all like him.

 

[Coltont]

Yep. And that's why we all like him.

Worst one I did was have a 660 slide off the floor of the skidder, the doors were off. I was pushing logs up that I just cut to legenth and I probably ran it over 4 times with a 540E skidder. It was complete garbage when I found it.

 

[VinceGU05]

Its like a little 2 stroke boxer engine

Little being the operative word ! 36mm pistons [emoji12] they are well built but heavy for what they are. But they are cool [emoji41]

 

[rattler]

Sent from my XT1060 using Tapatalk

 

[rattler]

Sent from my XT1060 using Tapatalk

 

[PA Dan]

Sent from my XT1060 using Tapatalk

Good looking noodle maker Mike!

 

[rattler]

Thank you Dan she runs purty good.

Sent from my XT1060 using Tapatalk

 

[drf256]

A 262 that got some tree revenge.

 

[Iron.and.bark]

Its like a little 2 stroke boxer engine

Completely different to the solo twin, which is like a vintage BMW bike engine.

Top stuff Vince!

 

[XP_Slinger]

My father in laws 359. I bought it new for him in 08' for giving us a place to live for a month when I separated active duty. After all the success I've had porting saws he told me to take it home today. He said "faster cuts equal less work for me, so tune her up!" Can't wait to start on it tomorrow evening. Squish with the gasket is .041 so it's gonna tighten up nice when the gasket goes in the garbage. I assumed that being it's an EPA model it would have a limited coil....Wrong! It's got a black coil so that's one less thing I have to purchase. Just gotta get a non cat muffler and my brother @RIDE-RED 350r said he has a deflector to donate to the project. Gonna be fun, I'll have a new thread up soon.

 

[USMC615]

My father in laws 359. I bought it new for him in 08' for giving us a place to live for a month when I separated active duty. After all the success I've had porting saws he told me to take it home today. He said "faster cuts equal less work for me, so tune her up!" Can't wait to start on it tomorrow evening. Squish with the gasket is .041 so it's gonna tighten up nice when the gasket goes in the garbage. I assumed that being it's an EPA model it would have a limited coil....Wrong! It's got a black coil so that's one less thing I have to purchase. Just gotta get a non cat muffler and my brother @RIDE-RED 350r said he has a deflector to donate to the project. Gonna be fun, I'll have a new thread up soon.
View attachment 31033

Nice...fine saw and will be an animal after you put the trick to it. Thank you for your service as well brother. By the way, like that '3' on the leg of your workbench.

 

[XP_Slinger]

Nice...fine saw and will be an animal after you put the trick to it. Thank you for your service as well brother. By the way, like that '3' on the leg of your workbench.

Thank you for your service as well Marine. My grandfather was a huge Dale Earnhardt fan and that sticker will always be there reminding me of him and the time we spent together in what used to be his (now mine) pole barn.

 

[Backtroller]

A 262 that got some tree revenge.

View attachment 31016 View attachment 31017 View attachment 31018 View attachment 31019

You going to do a little welding?

 

[Tor R]

Monday work....key to be shaved



For this saw who is my friend saw:

 

[drf256]

You going to do a little welding?

Was thinking about it, but it needed a split either way. Not worth the time for a mediocre result.

It's in a bad spot if you know 262's. It's where the heated switch hole is.

I have a case half for it.

 

[paragonbuilder]

Was thinking about it, but it needed a split either way. Not worth the time for a mediocre result.

It's in a bad spot if you know 262's. It's where the heated switch hole is.

I have a case half for it.

What happened Al?


Sent from my iPhone using Tapatalk

 

[drf256]

Eric dropped a tree on it.

It's his 262. The Moobs one we both cut with.

 

[Tor R]

Shaved key, not pretty but should work..


42/242, sometimes it can be difficult to get full throttle, throttle controller seems to be the key, experimental test with epoxy, waiting for it to dry.

 

[Simondo]

Shaved key, not pretty but should work..
View attachment 31093

42/242, sometimes it can be difficult to get full throttle, throttle controller seems to be the key, experimental test with epoxy, waiting for it to dry.
View attachment 31094

A bit of work on the 2 throttle rod bends or renew the roller is the way i go on that full throttle thing Tor...You will lose the flex link when you dog the saw in if you make the trigger solid I feel. Just my way of looking at it .

 

[Simondo]

I killed the KAT ...Runs just a bit better !!