What's on your bench?

[NateSaw]

026 is a gateway drug.

I would say take me to your dealer. But I'm already a mofo, and mastermind customer.

 

[Paul Fithian]

026 is a gateway drug.

My first hits were with 024's

 

[Ketchup]

My first hits were with 024's
View attachment 372605

I dig the way the old metal badges look on the black plastics. Very nice.

 

[Paul Fithian]

Thanks, but I must disclose the badge on the black 024 AV is a reproduction one from an eBay seller.

 

[NateSaw]

My first hits were with 024's
View attachment 372605

Looks good in black

 

[Paul Fithian]

Clean components to start 026 rebuild

 

[WillG]

Husqvarna 125BT backpack blower with a cracked flywheel. Fortunately the crank and key were okay. Another flywheel is on the way.

 

[Partner]

See how the professionals have fun I wonder why the wheel is crooked . First time I see the name on a Chinese top

 

[av8or3]

Another 95cc Dolmar. I’ve been on a roll and this is #3. It’s the first one built from a cut off saw case. Oil passages drilled, every single hole had to be tapped, including the LH thread for the chain catcher, oil pump modification. Case had to be milled (by Dremel) to fully seat the axel for the chain brake. Nail for chain brake spring had to be installed. Other custom fitting of available chain brake parts . Probably other stuff too, just forgot. Anyway, lot a darn work.

I’m going to come up short on parts for this one. Gonna need an air filter cover. If anyone can help, I got cash or parts to trade. Muffler too?
Aslo, since I’m begging , one of those little metal plates that’s used to capture the brake band, mounts on those two screw holes.

 

[Woodslasher]

Another 95cc Dolmar. I’ve been on a roll and this is #3. It’s the first one built from a cut off saw case. Oil passages drilled, every single hole had to be tapped, including the LH thread for the chain catcher, oil pump modification. Case had to be milled (by Dremel) to fully seat the axel for the chain brake. Nail for chain brake spring had to be installed. Other custom fitting of available chain brake parts . Probably other stuff too, just forgot. Anyway, lot a darn work.
View attachment 373140View attachment 373141View attachment 373142
I’m going to come up short on parts for this one. Gonna need an air filter cover. If anyone can help, I got cash or parts to trade. Muffler too?
Aslo, since I’m begging , one of those little metal plates that’s used to capture the brake band, mounts on those two screw holes.

Maybe check with oldpartsinasiajoe on AS for those bits, he seems to have all kinds of dolmar goodies.

 

[av8or3]

Maybe check with oldpartsinasiajoe on AS for those bits, he seems to have all kinds of dolmar goodies.

I’m real tight with Joe. It’s where I’m finding almost all my stuff.

 

[trooney]

Another 262 that I finally, after about 8 years, got done building. All it needs is the handle bolts that are coming.

 

[trooney]

I also have an NOS cover that I didnt use. Clutch cover in descent shape which is getting rare.

 

[NateSaw]

Had a moment this morning to sneak in a few more touches to my lovely wife's helmet... Still... More to come... But it's closer to getting the clear coat!

 

[pbillyi69]

great job

 

[NateSaw]

great job

Thank you sir! I like to color lol. And play with stickers

 

[WillG]

Put the 125BT back together with a good used flywheel

 

[beaglebriar]

Playing around with this tinker toy. I cut with it for ten minutes and twenty minutes later the muffler is still too hot to touch. Can't believe how corked up they are. Time to operate...

 

[beaglebriar]

Bye bye kitty ..

 

[NateSaw]

Bye bye kitty ..View attachment 373701

Bad kitty. Could use it as a cigarette lighter.