What's on your bench?

[Woodslasher]

I made popcorn to watch the inevitable fighting in this new oil thread. Y'all mucking it up with bench products n such. Very disappointed.

Husky oil for the win! Last time I “ran” this was when @heimannm dropped by a few weeks ago, looks lubed enough for me!

 

[Egg Shooter]

Husky oil for the win! Last time I “ran” this was when @heimannm dropped by a few weeks ago, looks lubed enough for me!
View attachment 299887

Most oils lube enough mixed at the right ratio for them, the engine's size and RPMs and task being used for.

 

[tickbitintn]

I've fully wrapped ma tool many times in the past.

Much safer that way....
Especially when engaged in rental pig antics...

[emoji106][emoji12]

Sent from my XT1635-01 using Tapatalk

 

[Mastermind]

Most oils lube enough mixed at the right ratio for them, the engine's size and RPMs and task being used for.

So....and let me get this straight. Oil is oily? Really?

 

[WillG]

Stihl FS55R coil replacement. After coil replacement it started on the first pull. Also tossed in a new plug, greased the gearbox and adjusted the throttle cable and carb as needed.

Sent from my E6910 using Tapatalk

 

[Skeans1]

Interesting. So cutting slash means they're loggers?
LMAO.
I'm just funnin here with you.
Before this gets out of hand.
To me, a wrap on 50cc saw is a waste, but just my opinion.

When you’re slashing or precommercial thinning it makes a lot of sense it gives you more reach on the clutch side. If you watch those guys they’re always flipping the saw around from side to side like we do when limbing.


Sent from my iPhone using Tapatalk

 

[Egg Shooter]

So....and let me get this straight. Oil is oily? Really?

Yes. Some more so than others.

 

[RI Chevy]

When you’re slashing or precommercial thinning it makes a lot of sense it gives you more reach on the clutch side. If you watch those guys they’re always flipping the saw around from side to side like we do when limbing.


Sent from my iPhone using Tapatalk

Yes sir. I'm sure it has it uses.
Nice work on that 550.

 

[Woodslasher]

Looking good so far.
Can't wait to see it with the "upgrades".
Lol

Sent from my XT1635-01 using Tapatalk

PNW FOREVER!

 

[merc_man]

Yup I'm an east coaster so ya don't see many 3/4 wraps, save my own.
One thing I like about em is, it's kinda like putting a roll cage around yer saw.

Wish i could find a 3/4 wrap or 2 for my 038 magnums

Sent from my SM-G950W using Tapatalk

 

[Sagebrush33]

Wish i could find a 3/4 wrap or 2 for my 038 magnums

Sent from my SM-G950W using Tapatalk

Have one fabbed.....?

 

[Maintenance Chief]

Wish i could find a 3/4 wrap or 2 for my 038 magnums

Sent from my SM-G950W using Tapatalk

They came with the actual full wrap ( not easy to find) , I modified an aftermarket 440 3/4 wrap to fit by clamping the fuel tank side brace in a vise and followed the bend of the half wrap. It didnt snap on me but could so go slow if you attempt it.

 

[merc_man]

They came with the actual full wrap ( not easy to find) , I modified an aftermarket 440 3/4 wrap to fit by clamping the fuel tank side brace in a vise and followed the bend of the half wrap. It didnt snap on me but could so go slow if you attempt it.

Might have to try the 440 handle then. Hiw far did you have to bend it?

Sent from my SM-G950W using Tapatalk

 

[merc_man]

Well i couldn't wait. I put a bar an chain on it and cut a couple cookies. Half way through the second i thought, crap never put bar oil in lol. Ran good. Kind of a turd but it's not broke in yet and i had it little rich. I think it will really benafit from a muffler mod. Sounds pretty choked up. But its hotter then cat shi t on a tin roof so im done for the day.
It fit rite in with the rest of the crew

Sent from my SM-G950W using Tapatalk

 

[RI Chevy]

Wow. Way way too organized there sir...

 

[Egg Shooter]

Well i couldn't wait. I put a bar an chain on it and cut a couple cookies. Half way through the second i thought, crap never put bar oil in lol. Ran good. Kind of a turd but it's not broke in yet and i had it little rich. I think it will really benafit from a muffler mod. Sounds pretty choked up. But its hotter then cat shi t on a tin roof so im done for the day.
It fit rite in with the rest of the crew

Sent from my SM-G950W using Tapatalk

The Tmax is the coolest thing in the picture. And the Mini Macs. Lol. Oh! Missed the 200T. That's pretty dern cool too

 

[merc_man]

The Tmax is the coolest thing in the picture. And the Mini Macs. Lol. Oh! Missed the 200T. That's pretty dern cool too

Hey those orange and grey things make great door stoppers and wheel chocks.

But have to agree. The tmaxx is pretty cool. And just like saws. Cant have just one. Got two t maxx's lol


Sent from my SM-G950W using Tapatalk

 

[Egg Shooter]

Hey those orange and grey things make great door stoppers and wheel chocks.

But have to agree. The tmaxx is pretty cool. And just like saws. Cant have just one. Got two t maxx's lol


Sent from my SM-G950W using Tapatalk

I'm back into the RC cars after a few years away. Currently building a TLR 5ive B, 1/5 scale race buggy.

 

[merc_man]

I'm back into the RC cars after a few years away. Currently building a TLR 5ive B, 1/5 scale race buggy.

Oh cool. The big boys. Whats in that one for a motor.

Sent from my SM-G950W using Tapatalk

 

[Egg Shooter]

Oh cool. The big boys. Whats in that one for a motor.

Sent from my SM-G950W using Tapatalk

For now I'm putting in a stock Zenoha 32cc with tuned pipe. Eventually I'll upgrade to a 34cc reed case engine, built by O'Neal brothers racing, that puts out 9.4 hp.