What's on your bench?

[Graf]

Zenoah g2500t, new diaphragms and red caps removing, it did not run well anyway and finally I realized why

A stray feather in the tank blocked fuel strainer... I've never seen such a thing

 

[beaglebriar]

Stock 2152 in need of some help. Definitely needs the fw side case. Crank and piston. Cylinder may be salvageable but I’m not crossing my fingers.

got all the parts except the case give me a shout if you have a lead on one.

Have to say, that's the first time I've seen a broken rod in one of those little saws.

 

[justoldsaws]

This explains the clutch cover damage on my new 288.

 

[Wolverine]

This explains the clutch cover damage on my new 288.
View attachment 225820 View attachment 225821

That sucks!

 

[RI Chevy]

What happened? Wrong clutch? Wrong nut?

 

[Spladle160]

Zenoah g2500t, new diaphragms and red caps removing, it did not run well anyway and finally I realized why
View attachment 225818
A stray feather in the tank blocked fuel strainer... I've never seen such a thing

Must be a really quiet saw not to scare the birds out of the tree while cutting.

 

[justoldsaws]

What happened? Wrong clutch? Wrong nut?

Looks like a piece of the clutch spider broke off and was stuck between the clutch and cover?

 

[huskihl]

Looks like a piece of the clutch spider broke off and was stuck between the clutch and cover?

I bet it got pissed revved and the clutch unthreaded into the cover

 

[huskihl]

@panolo

 

[WillG]

Today at work I epoxied the 2d transducer in the hull of the skeeter, and did some repairs to a trailer as well as diagnosing an outboard. Tonight I'm going to mess around with my Super Wiz 66. Also did some painting at work today.

Sent from my E6910 using Tapatalk

 

[WillG]

Homie Super Wiz 66 gear drive. Got the governor mocked up (need screws) and a bunch of parts soaking in the solvent tank overnight. Also started cleaning up the fuel tank and did a bunch of thread repairs with helicoils. Hopefully this weekend I'll be able to get the throttle handle fully reassembled. Gotta take a trip to Ace for screws. Still need to track down friction washers for the recoil and possibly a starter cup and pawls.

Sent from my E6910 using Tapatalk

 

[David Young]

First time I tried it that way....It came out easily I though with some pressure....The tunnels are perfect and smooth...Had about 30 seconds of TouchUp on the bottom feeders

pics of the after?

 

[WillG]

61/272 hybrid thing I just bought. Pulled apart, cleaned up and parts ordered. Gonna build it with a base gasket and muffler mod/dual port muffler.

Sent from my E6910 using Tapatalk

 

[David Young]

Marshall 372

 

[David Young]

While I’m set up here’s some 365 with cowbell as my buddy says

 

[StuntCockWelder]

Sexy bish!... Im not talkin about @JohnnyBlade in the background

 

[WillG]

All cleaned, oiled and boxed till I get the bits I need to assemble. Decided to give a Hyway pop up piston kit a try from HL Supply. Found a stripped carb screw in the cylinder and the intake broken into. [emoji3525]

Sent from my E6910 using Tapatalk

 

[Mkinslow]

Marshall 372

Looks good David

Sent from my SM-G892A using Tapatalk

 

[Cut4fun]

Few days ago came home from lunch out with wife and found this out back in testing area.

Farmer I did some saws for free of charge to get them running again dropped me off a new testing big saw log.

Story why I didnt charge him anything. I told him I remember back about 22-25 years ago in a bad snow storm in Dec and my plow pump was down. We were snowed in 700' back of the road. Looked out and he had his cab 4x4 tractor with the 9-10' blade on opening me up.
He told me it has to be really bad before he puts that blade on.

This piece came off about 20' up the tree. The other 20' or so still out there in the front field standing proud but broken from past years storm.

Now to go sink a poulan in it with a crap chain to see if metal in that one spot they stop cutting at. I am thinking it was just a odd spot to be cutting with their small saws I heard out there in past.

 

[Cut4fun]

Zenoah g2500t, new diaphragms and red caps removing, it did not run well anyway and finally I realized why
View attachment 225818
A stray feather in the tank blocked fuel strainer... I've never seen such a thing

Thats a new one to me.