What oil is best? and what ratio?

[Mastermind]

I've noticed a little of that too in my MMWS261. What's your recommendation for a new oil?

I've been using Amsoil Dominator with great results. My 357XP still drools a little, but I've got it tuned a little fat (and it's still spinning 14500)

 

[Joe Kidd]

I've been using Amsoil Dominator with great results. My 357XP still drools a little, but I've got it tuned a little fat (and it's still spinning 14500)

Same ratio you recommended, 40:1?

 

[Joe Kidd]

Randy, one more question and I'll leave you alone.
Can I use the Dominator and the same ratio in my other 2T(20-30cc) and Stihl 4-mix stuff??

 

[Mastermind]

Same ratio you recommended, 40:1?

Yes.

Randy, one more question and I'll leave you alone.
Can I use the Dominator and the same ratio in my other 2T(20-30cc) and Stihl 4-mix stuff??

And yes.

 

[mrxlh]

I've been using Amsoil Dominator with great results. My 357XP still drools a little, but I've got it tuned a little fat (and it's still spinning 14500)

Randy, I ran 3 gallons of RA at 25:1 and didn’t get any goo, but I was running 1 oz. per gallon of Techron in the fuel, 87 non ethanol. Matter of fact I ran 2 gallons of Dominator at 25:1 and didn’t get any goo there either, same thing 87 non ethanol with 1 oz. per gallon Techron.

 

[Mastermind]

Randy, I ran 3 gallons of RA at 25:1 and didn’t get any goo, but I was running 1 oz. per gallon of Techron in the fuel, 87 non ethanol. Matter of fact I ran 2 gallons of Dominator at 25:1 and didn’t get any goo there either, same thing 87 non ethanol with 1 oz. per gallon Techron.

I'll try that.

 

[dave53223]

I've been using Amsoil Dominator with great results. My 357XP still drools a little, but I've got it tuned a little fat (and it's still spinning 14500)

I will try Dominator in all my saws and see how I like it. Thankyou for the recommendation. I do not want goop all over everything. That is why I asked for help in the first place.

 

[Czed]

I mixed 10 gallons of Castrol go at 32/1
For a chusky 372
Going to mill poplar into beams
I'm told nothing good will come from this.

 

[rogue60]

Castrol Go what is it never used it myself had a look online doesn't even look like we can buy it down here.

 

[Kiwioilboiler]

Castrol Go what is it never used it myself had a look online doesn't even look like we can buy it down here.

It's your oil mate. You've started a movement.

 

[Woodwater]

36,689385741743 : 1

 

[rogue60]

It's your oil mate. You've started a movement.

What? A movement well they a bit late to the party by way over 20 years.
If it doesn't say Ative or Garden on the bottle I wouldn't even put it on my morning toast lol

But in all seriousness I'll look around if I can get a bottle (maybe if I could be bothered) and see if it's anything the same as Ative or Garden.

 

[Tomos770]

Motul 2T 800 is a 18.9 @100C

Or 15.5 @100C........off road version...

 

[Duce]

36,689385741743 : 1

I think you are a little heavy I run 36.6892453241743:1

 

[Gearshifter]

Saber at 40:1 will foul plugs and leave drool behind if not tuned just right.

I do find if I idle alot it will while moving stuff around it will do that . Once full revs it clears. I've done almost 2 litres of amsoil ( not sure what that is in ounce ) and everything looks pretty good compared to some oil I've run in the past

 

[Kiwioilboiler]

I do find if I idle alot it will while moving stuff around it will do that . Once full revs it clears. I've done almost 2 litres of amsoil ( not sure what that is in ounce ) and everything looks pretty good compared to some oil I've run in the past

Where in the Land of the Long White Cloud are you mate?

 

[jakethesnake]

Bunch of damn hippies.

 

[Woodslasher]

View attachment 376558Bunch of damn hippies.

Might wanna edit out your address on the letter there buddy.

 

[Wilhelm]

Chainsaws have a separate oil tank which is empty every time I spend a full tank of pump fuel!
That indicates the saw mixes its own fuel and spends as much oil as it needs - less oil when idling, more oil on WOT.

 

[Wilhelm]

Might wanna edit out your address on the letter there buddy.

Was thinking the same!
I'll download the picture, mark the area in question for him and upload it again.