Todays snag

[TALLGUY]

Carl. Should I put a runner together to show off the power house. I have one that runs. I found out it runs in the auction circle giving the rope a tug to check compression. That will get everyone's attention. Struggle was standing next to me.

Sent from my SM-G900V using Tapatalk

 

[67L36Driver]

I bet the bidding got hot and heavy. LOL

 

[TALLGUY]

I had already gotten the saw. Shane just had asked me how the compression was. We were in the ring and I just gave it a little pull. When it fired I was completely surrounded by people. The auctioneer stopped and looked at me with a very strange look. (I know the auctioneer well) I shut it down as fast as I could find the switch. It defiantly got some attention. Who would have guessed that a saw you couldn't even see the paint color on would fire on a half attempt.

 

[Redfin]

I probably need to pay for it before I open it.

Pay for it then throw it in the corner. Someday after you forget about it you can find it again and tell us about it then.

 

[67L36Driver]

Hedges are best handled with a backhoe and a dump truck.
Little Echos are to love!

 

[jmssaws]

• got these yesterday at the pawn shop.

 

[Redfin]

Went to my buddies Poulan shop today to pick some parts for the 335 I found in this thread. He says just take that one. Its got all the parts you need. May have to build this one too.

 

[SixGun]

Going through some NOS husky parts and found an OEM set of 181 thin rings!

 

[trooney]

You lucky dog John! U gonna sell one of them maybe?!!!

 

[jmssaws]

Mighty Mite race you say?

How about 16" rounds with 10" bar?

View attachment 10086

I havn't run this shelf queen since the day I bought it.

That's a kool saw.

 

[bikemike]

Got done working on a poulan pro 5020 and got a crap load of saws coming my way cause of it. These are 2 of 5 or 6 saws I'm getting. Still need to get the other 2 bigger macs and a few more poulans

 

[Redfin]

Diggin through a local poulan shops bars found this 20" 12mm stihl mount. Just thought its cool.

 

[huskihl]

Diggin through a local poulan shops bars found this 20" 12mm stihl mount. Just thought its cool.View attachment 12922

I'm not a bar guru, but those are some of the best. Cool looking too

 

[lwhaples]

Went into the Sthil dealers for some tie straps and found this for$40. He said it needs a piston.

 

[ny15]

Went into the Sthil dealers for some tie straps and found this for$40. He said it needs a piston.

You suck, lol. I have been looking for a project 359

 

[Agent Orange]

Need some help IDing some chain.

Scored three loops of this, and two old Stihl Rollermatic 16" for my 362 from my father in law.

Next question, I have .63 gauge rim sprocket 3/8" chain, will that rim sprocket run 3/8" .50 or .58 ?

 

[Agent Orange]

Need some help IDing some chain.

Scored three loops of this, and two old Stihl Rollermatic 16" for my 362 from my father in law.

Next question, I have .63 gauge rim sprocket 3/8" chain, will that rim sprocket run 3/8" .50 or .58 ?

Uggghhh, it's electric saw chain. At all useable ??

 

[huskihl]

Need some help IDing some chain.

Scored three loops of this, and two old Stihl Rollermatic 16" for my 362 from my father in law.

Next question, I have .63 gauge rim sprocket 3/8" chain, will that rim sprocket run 3/8" .50 or .58 ?

If your rim sprocket is 3/8, it'll run any 3/8 chain. 050, 058, and 063 are the groove width of the bar. If you have an 063 bar, you should run 063 chain. You can measure the drive link width and distance between links to id your chain.

 

[TundraRider]

Got one free Husqvarna 40 yesterday with one part saw.
I don't know when this one was made, with luck @SawTroll will peak in and clarify when it was made

Here is some pictures:
View attachment 7398

View attachment 7399

View attachment 7400

View attachment 7402

View attachment 7403

Looks like the same vintage of the one that followed me home recently.

 

[Agent Orange]

If your rim sprocket is 3/8, it'll run any 3/8 chain. 050, 058, and 063 are the groove width of the bar. If you have an 063 bar, you should run 063 chain. You can measure the drive link width and distance between links to id your chain.

Thanks for the help.

I've got .063 stock on the MS362, I need to check the width on the two new bars.