The Swap Meet Thread

[STOVE]

Looking for a cs-590 muffler

Not loving the sound mine is making, going more conservative on the next mod

 

[LAWN BOY]

 

[oddsaws]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37

 

[oddsaws]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37
View attachment 469857

Nevermind, ordered from Jeff

 

[ErnieG]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37
View attachment 469857

https://www.amazon.com/Socket-Screws-Metric-Machine-Threaded/dp/B0969WVVC2/ref=mp_s_a_1_1_sspa?adgrpid=173139159785&dib=eyJ2IjoiMSJ9.FtSlah0GJkBisSJ_5H2V1_iaGXLme89JiAW5yH1xIDEN163YVoh_Bp3re336OcnLqZGmdOxw8DdiIqCjvm_Oh_Y6HlqZ7ip8BMhrnXsV3rfY4_WfKpGGhYP1izL_ESxrL0mIJGBzsd_4rQiQ4fUHruC_FCcRe7PC6sVdmY04nyVlqD1hReGz95d2Pfp3jZoTSZiFERJEmBYL32LASphNtw.PQcG3T92Csb_C-2XqWrYpBhqJqwYUfB1D7CfwC9KDWw&dib_tag=se&hvadid=729942840385&hvdev=m&hvexpln=68&hvlocphy=9007132&hvnetw=g&hvocijid=10674036045087181992--&hvqmt=e&hvrand=10674036045087181992&hvtargid=kwd-24085536144&hydadcr=13171_13552675&keywords=m5x65mm&mcid=a71410a46d103201aff08e7b121e127c&qid=1757977695&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

 

[brushwacker]

Need the nuts for the exhaust studs on an 395xp, 2 or more. If it should have washers would need them also.
Needing also a fuel tank vent for an 455 Ranchers.
I have some Stihl parts, bit of Husqvarna and others could send for trade or paper.
Home internet currently isn't working so might not reply back for several hours.

 

[Bill G]

I guess I am a bit puzzled by the folks needing modern Husky parts.......

Did ya ever think to buy from Bruce......the site owner?

 

[ErnieG]

Looking for a Makita ea6100 crankshaft...

Thanks
Ernie

 

[oddsaws]

I guess I am a bit puzzled by the folks needing modern Husky parts.......

Did ya ever think to buy from Bruce......the site owner?

Excuse my ignorance as I don’t know everyone’s real names. Does Bruce = @Gentleman and is he affiliated with HLS? I do order from them often.

 

[lehman live edge slab]

Excuse my ignorance as I don’t know everyone’s real names. Does Bruce = @Gentleman and is he affiliated with HLS? I do order from them often.

Owner of hls and this forum

 

[lehman live edge slab]

View attachment 469781View attachment 469782View attachment 469783

Looks like a late 80’s early 90’s 250 trail boss 2x4 but you must have gotten some 250 4x4
Or 350l plastics to swap on or someone did. I believe all the 250 2x4’s were blue and grey or 2 tone blue in that era.

 

[oddsaws]

Owner of hls and this forum

Always saw HLS advertised but didn’t know they were that closely related. Good to know I’m supporting

 

[LAWN BOY]

Looks like a late 80’s early 90’s 250 trail boss 2x4 but you must have gotten some 250 4x4
Or 350l plastics to swap on or someone did. I believe all the 250 2x4’s were blue and grey or 2 tone blue in that era.

You may be right very well. If I recall it's a 90s model. This is how I bought it and I'm not super keen on the Polaris ATVs so I'm not certain.

 

[Bill G]

Bruce owns the site. I have bought (12) 395's from him and many parts.
I thought Randy was a co-owner also but hell it seems some have ran him off.

 

[LAWN BOY]

 

[LAWN BOY]

 

[Bill G]

View attachment 470600

Do you do any trapping?

 

[LAWN BOY]

Do you do any trapping?

No

 

[Bill G]

Do you do any trapping?

That is too bad.....It is a good education.

 

[LAWN BOY]

That is too bad.....It is a good education.

View attachment 470698

When I was younger I'd tag along with my dad trapping all the time.