The Swap Meet Thread

[STOVE]

Looking for a cs-590 muffler

Not loving the sound mine is making, going more conservative on the next mod

 

[LAWN BOY]

 

[oddsaws]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37

 

[oddsaws]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37
View attachment 469857

Nevermind, ordered from Jeff

 

[ErnieG]

Looking for an m5 x 65mm bolt for a 395xp. The one that connects the front of the crankcase/dawg. Checked around local hardware stores and couldn’t find the length.

Part
725 53 43-55

37
View attachment 469857

https://www.amazon.com/Socket-Screws-Metric-Machine-Threaded/dp/B0969WVVC2/ref=mp_s_a_1_1_sspa?adgrpid=173139159785&dib=eyJ2IjoiMSJ9.FtSlah0GJkBisSJ_5H2V1_iaGXLme89JiAW5yH1xIDEN163YVoh_Bp3re336OcnLqZGmdOxw8DdiIqCjvm_Oh_Y6HlqZ7ip8BMhrnXsV3rfY4_WfKpGGhYP1izL_ESxrL0mIJGBzsd_4rQiQ4fUHruC_FCcRe7PC6sVdmY04nyVlqD1hReGz95d2Pfp3jZoTSZiFERJEmBYL32LASphNtw.PQcG3T92Csb_C-2XqWrYpBhqJqwYUfB1D7CfwC9KDWw&dib_tag=se&hvadid=729942840385&hvdev=m&hvexpln=68&hvlocphy=9007132&hvnetw=g&hvocijid=10674036045087181992--&hvqmt=e&hvrand=10674036045087181992&hvtargid=kwd-24085536144&hydadcr=13171_13552675&keywords=m5x65mm&mcid=a71410a46d103201aff08e7b121e127c&qid=1757977695&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRm&psc=1

 

[brushwacker]

Need the nuts for the exhaust studs on an 395xp, 2 or more. If it should have washers would need them also.
Needing also a fuel tank vent for an 455 Ranchers.
I have some Stihl parts, bit of Husqvarna and others could send for trade or paper.
Home internet currently isn't working so might not reply back for several hours.

 

[Bill G]

I guess I am a bit puzzled by the folks needing modern Husky parts.......

Did ya ever think to buy from Bruce......the site owner?

 

[ErnieG]

Looking for a Makita ea6100 crankshaft...

Thanks
Ernie