The Swap Meet Thread

[dahmer]

D176 will work on my poulan 3700. I’ll be interested. What would be shipping to 53011


Sent from my iPhone using Tapatalk

No clue on shipping cost, I ship maybe 2 times a year. Only going to cost you shipping, say even if it’s $15 it’s less than a new bar price.

 

[dahmer]

I have 2 new Carlton semi chisel chains. 3/8, .050, 64 dl, 18”. Trade for stuff for Echo 490 or 590. Makita 64xx, 79xx, 9010. Also 91VXL062. Worst thing I can say is no. Thanks.

 

[Wilhelm]

I have 2 new Carlton semi chisel chains. 3/8, .050, 64 dl, 18”. Trade for stuff for Echo 490 or 590. Makita 64xx, 79xx, 9010. Also 91VXL062. Worst thing I can say is no. Thanks.

I'll give You a broken 64xx/73xx/79xx clutch, I broke the spider to get it off, shoes and springs look good from afar.

Carlton A2 full chisel is good stuff, don't think I ever tried Carlton semi chisel should be good too though.

 

[Bodell0]

Hey fellas. Sorry for the long period that I didn’t get to do my hobby. Went through a nasty divorce that was all of a sudden. Don’t worry, I didn’t sell anything and the ex didn’t get any of my assets. Don’t worry though, she’s well taken care of. Anyways, I’m back boys.


Sent from my iPhone using Tapatalk

 

[dahmer]

I'll give You a broken 64xx/73xx/79xx clutch, I broke the spider to get it off, shoes and springs look good from afar.

Carlton A2 full chisel is good stuff, don't think I ever tried Carlton semi chisel should be good too though.

I think I’ll pass, I recall Croatian shipping isn’t very friendly. Have to give you credit Wilhelm, I’ve never seen so much stuff so neatly packed in such a small box. I saw the box and immediately thought you only shipped half of the things.

 

[av8or3]

Have to give you credit Wilhelm, I’ve never seen so much stuff so neatly packed in such a small box. I saw the box and immediately thought you only shipped half of the things.

I get packages from the EU fairly often and I’ve noticed the same thing as well as thinner, lighter packing materials. When talking with my favorite seller , she’s always mindful of what fits where and how to get it there cheap. May just be a European mindset when it comes to shipping. Lol.

 

[big t double]

Does this interest any of you guys that are into old *s-word? nos carb box cover for an 044 with the old style flat air filter.

 

[David Young]

Looking for a carb for a solo 667. A bing 48 or a walbro hda 158. I have greenbacks to swap
Pm if you still need one

Sent from my iPhone using Tapatalk

Pm if you still need this

 

[Gebada22]

I have an older 026 with the constant oiler. I am looking for the clutch drum cover 1121-160-2900. If anyone has one or a potential contact please let me know. Thanks.

 

[Matt Ellerbee]

I have an older 026 with the constant oiler. I am looking for the clutch drum cover 1121-160-2900. If anyone has one or a potential contact please let me know. Thanks.

Is that all you need? I have a 1121 carcass with a lot of parts on it.

 

[Bob95065]

I am working on a 026 for a neighbor. If won't idle and passed a vacuum/pressure test. I suspect the carb even after rebuilding it. Anyone have a 026 Walbro carb up for grabs?

 

[MustangMike]

Also check the tank vent.

 

[Benwa]

Also check the tank vent.

Especially if it's the older style that uses the grub screws in the short chunk of fuel line for a vent. Surprising how easily they can get plugged.

 

[PogoInTheWoods]

Those carbs are all pretty much bullet proof --especially the WT-22 and WT-194. May want to make sure the choke flap isn't just hanging inside the air filter disrupting things..., unless of course it exhibits the problem with the air filter\choke removed.

And speaking of the choke, if it needs to be choked for each restart, you still probably have an air leak that wasn't detected by your particular leak testing method.

I have a 1121 carcass with a lot of parts on it.

Air filter and cover by chance?

 

[Matt Ellerbee]

Those carbs are all pretty much bullet proof --especially the WT-22 and WT-194. May want to make sure the choke flap isn't just hanging inside the air filter disrupting things..., unless of course it exhibits the problem with the air filter\choke removed.

And speaking of the choke, if it needs to be choked for each restart, you still probably have an air leak that wasn't detected by your particular leak testing method.



Air filter and cover by chance?

I’ll have to look, but I don’t think so.

 

[Duce]

Any one need a 390xp crank or clutch side case half?

 

[Duce]

@cuinrearview can you use them?

 

[cuinrearview]

@cuinrearview can you use them?

Fairly certain those parts are good on the 390 I have in a box. Thanks though. I bet someone will be along to claim them.

 

[tickbitintn]

Anybody have a chain brake cover for an echo cs-400?
Have PP, Venmo or ever weakening govt. currency...

 

[mikerudder]

I am working on a 026 for a neighbor. If won't idle and passed a vacuum/pressure test. I suspect the carb even after rebuilding it. Anyone have a 026 Walbro carb up for grabs?

I have a box of 1121 stuff I will take a peak if I have one.