DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Powerstroke Cowboy]

The DCS7901 muffler will be lighter than the stihl muffler. Plus it'll look a lot better!

If you gut your oem muffler you will loose a lot of weight.

While your in it this far you might as well pull the crank seals and inspect the bearings. Then throw new seals in if the bearings look good.

Welcome to the club!!

 

[eric4]

Gut the OEM muffler, open up the factory exhaust outlet - You'll have an awesome sounding screamer!

From what I saw, you've gotta use MAP gas to heat up and uncrimp the lip? I don't think I've got the welding chops to tack it all back together if it's gotta be cut apart...

 

[Wilhelm]

Does the DCS6400 feature a Stainless Steel muffler in the US?
Hold a magnet to it, it is not SS if the magnet holds on good.

Either way, You "can" uncrimp even the SS muffler cold - it is harder to do but it is possible.
I did my PS-7310 SLR muffler cold.

If it is a regular alloyed steel muffler body uncrimping is fairly easy cold - I did my PS-7900 muffler cold.

Also, there are members here that offer muffler modding for a price.

 

[Wilhelm]

PS-7900 muffler with baffle/bird cage.
Yes, any future mufflers will just get gutted!

Post in thread 'Show off your muffler mods'

Oct 29, 2017

Humble mod, works nicely for me and my PS-7900.

BEFORE


Uncrimp cold with side cutter pliers (works nicely, left crimp at an angle under 90° for easier recrimping)


Enlarge all existing holes and ad a few more (I didn't want to remove the birdcage entirely)


Put together and recrimp.
AFTER

• Wilhelm

• 

PS-7310 muffler with SLR tube, gutted.

Post in thread 'Show off your muffler mods'

May 31, 2018

Dolmar PS-7310 muffler in the works.
Aiming for a humble mod, single outlet with stock spark screen, SLR pipe cut out.



I think I got my moneys worth out of that cutoff wheel.


To be continued . . .

• Wilhelm

• 

Post in thread 'Show off your muffler mods'

May 31, 2018

Humble Dolmar PS-7310 SLR muffler mod.

• Wilhelm

• 

Post in thread 'Show off your muffler mods'

May 31, 2018

The SLR muffler features a lot of surface under its spark screen.

• Wilhelm

• 

 

[Powerstroke Cowboy]

Does the DCS6400 feature a Stainless Steel muffler in the US?
Hold a magnet to it, it is not SS if the magnet holds on good.

Either way, You "can" uncrimp even the SS muffler cold - it is harder to do but it is possible.
I did my PS-7310 SLR muffler cold.

If it is a regular alloyed steel muffler body uncrimping is fairly easy cold - I did my PS-7900 muffler cold.

Also, there are members here that offer muffler modding for a price.

The DCS6401 has on aluminized steel muffler just like the DCS7901.

The DCS6421 has the new fangled heavy stainless muffler.

 

[Wilhelm]

Cold uncrimp easy then!

 

[eric4]

Ah! That plier pic is a helpful visual.

Mine is the 6421, with stainless muffler. Certainly feels overweight...Is that the style with the cat converter? Guess I'll find out when it's peeled open

 

[huskihl]

Ah! That plier pic is a helpful visual.

Mine is the 6421, with stainless muffler. Certainly feels overweight...Is that the style with the cat converter? Guess I'll find out when it's peeled open

Yours is the cat muffler. There’s damn near enough to make another muffler inside that thing. Gut it all out of there

 

[eric4]

Yours is the cat muffler. There’s damn near enough to make another muffler inside that thing. Gut it all out of there

Just a cat? I think this thing can pummel a lion.

 

[eric4]

Here's that aliexpress foam air filter, atop a Redbeard 2" stack. Sadly doesn't quite fit the top cover in it's current state, but I'm considering shaving it down. Might shop around for another 2" filter that has an offset inlet, pushing the filter closer to the engine.

Doubt I'd hack up my top cover though, until this filter is properly vetted thru some testing.

 

[old_sir_henry]

Last year I was able to fill another gap in my collection: The missing DOLMAR CA Mk 2, the one with rigid but rubber covered rear handle.

This is her:





Now I have all three variants: Rigid handle painted metal, rigid handle rubber covered and AV-handle.
Gonna make photos of them three together when the weather will be better.

 

[qurotro]

That smooth shaping is looking sooo good!