Tearing down my JMSSAWS, one by one...

[malk315]

Sondre I have an OTC compression tester (snap on maker) that reads 220 or so on my 262 and 178 on the 55 I rebuilt. You can Barrow if u want to meet somewhere. You aren't crazy far. Someday I'll see where my Hacked up 385 is at. That one has some thump!

Sent from my XT1585 using Tapatalk

 

[huskyboy]

Your oil gas mix isn't the problem here either, looks to be pretty well coated inside of oil. Stratton tried blaming my issues on oil and engine overspeed.

 

[dall]

Your oil gas mix isn't the problem here either, looks to be pretty well coated inside of oil. Stratton tried blaming my issues on oil and engine over speed.

the rpm he runs every saw he touches is probably the reason why he's a effin retard

 

[drf256]

I missed it. What was the comp on the 90cc Dolmar?

 

[mdavlee]

158 doc.

385 was 200~ from what I remember. Might be more.

 

[angelo c]

I'll help anyway I can. All Sondre has to do is give me the ported saws in question and his problems disappear.


On a side note. I'm not a porter or machinist and never claimed to be. But I can help disassemble
and assemble if need be. Checking squish and a good look over.

An "uncle lee built" saw is definitely on my bucket list....

anybody wanna sell me a JMS saw just so I can have Lee redo it ?
sorry Sondre, humor in this mess is all I can find right now,

 

[SOS Ridgerider]

Sondre I have an OTC compression tester (snap on maker) that reads 220 or so on my 262 and 178 on the 55 I rebuilt. You can Barrow if u want to meet somewhere. You aren't crazy far. Someday I'll see where my Hacked up 385 is at. That one has some thump!

Sent from my XT1585 using Tapatalk

That would be great Eric. I might actually be up in the Worcester area tomorrow.

 

[malk315]

Worcester is really close. Let's meet somewhere I think I have your number. I'm around all day tomorrow anytime is good. May clean a 365 and change a clutch spring on the 262 I donated to the raffle.

Sent from my XT1585 using Tapatalk

 

[SOS Ridgerider]

An "uncle lee built" saw is definitely on my bucket list....

anybody wanna sell me a JMS saw just so I can have Lee redo it ?
sorry Sondre, humor in this mess is all I can find right now,

Humor is definitely welcome Angelo. That's what I'm trying to do too. I'd rather laugh than cry about this. It's just a mess, but it'll get sorted through.
By the way, I wouldn't mind having an Uncle Lee Saw myself. Lol.

 

[SOS Ridgerider]

Worcester is really close. Let's meet somewhere I think I have your number. I'm around all day tomorrow anytime is good. May clean a 365 and change a clutch spring on the 262 I donated to the raffle.

Sent from my XT1585 using Tapatalk

Great! Pm me if you don't have my number.

 

[SOS Ridgerider]

This 6100 is quite different than the others, but thanks to @backhoelover for sending me the ipl for it, it's now apart. It looks good as well. Pics are coming.

 

[SOS Ridgerider]

Here's piston and jug. Scribe marks on the piston, and a couple of faint lines. The base looks sanded to me, but I could be wrong. There are swirl marks in the jug. Almost looks like it's been honed or something like that.

 

[dall]

base looks sanded to me

 

[SOS Ridgerider]

The 5105 came apart tonight too. Not looking bad at all.

 

[SOS Ridgerider]

With that said, mufflers really aren't his thing. This was brand new, never touched when I sent it out.

 

[dall]

was this a new saw also sondre?

 

[SOS Ridgerider]

was this a new saw also sondre?

Yes, never touched.

 

[dall]

Yes, never touched.

ok alot ugly in the cylinder for the little bit of use its had

 

[SOS Ridgerider]

ok alot ugly in the cylinder for the little bit of use its had

Yes, it's seen maybe two tanks by me since I got it back. The rest is the time he put on it.

 

[Duce]

A snowmobile mechanic would repair sleds, tell customer sled would be done in a couple weeks. Repair them and rent the sled out for a weekend. Do people ever rent out chainsaws?