Tearing down my JMSSAWS, one by one...

[hseII]

Mine only had to be machined 0.012", if anybody's asking...

 

[SOS Ridgerider]

Mine only had to be machined 0.012", if anybody's asking...

I'm not sure how much was taken off of all these, but I want to say one of them was 0.017 in one corner. @drf256 @Moparmyway

 

[hseII]

I'm not sure how much was taken off of all these, but I want to say one of them was 0.017 in one corner. @drf256 @Moparmyway

Yeah,

Mine was 0.008ish, but to fix, 0.012 had to be removed.

Plus the cases had a bad high-low.

 

[SOS Ridgerider]

Yeah,

Mine was 0.008ish, but to fix, 0.012 had to be removed.

Plus the cases had a bad high-low.

JMS sure knows how *f-word'em up...

 

[hseII]

JMS sure knows how *f-word'em up...

I had a boss tell me once, " sometimes, you will work people, & they will do 80% of a task: yeah, you have to do the other 20%, but they did the 1st 80%."


I got lucky: Randy just fixed my saw: I am without a doubt, sure of this.

It took him longer to tear it down & see what the problems were than it did to actually fix it.

As usual, the port work was Phenomenal.

It's a shame Jason didn't catch his problems before they caught him, but sometimes, that's how it goes.

Randy broke his Stihl Magnet piston pin tool, so now I owe him a tool.

@definitivedave

I need one of those...

 

[drf256]

The larger jug needed .017 off Sondre. I believe that was the 6100 on Kevin's bench now.

The 5105 needed about 7 off IIRC.

I wanna give credit where it's due here, Kevin has done the Lion's share of the work here. All I did was machine 2 bases and try to fix one muffler. Kevin has taken all the other work on himself. I've been backed up and busy beyond this year.

So the credit and thanks goes to Mopar, not me.

 

[hseII]

I've been backed up and busy beyond this year.

.

A Dose of Salts or Castoria will cure you of that.

 

[Moparmyway]

The larger jug needed .017 off Sondre. I believe that was the 6100 on Kevin's bench now.

The 5105 needed about 7 off IIRC.

I wanna give credit where it's due here, Kevin has done the Lion's share of the work here. All I did was machine 2 bases and try to fix one muffler. Kevin has taken all the other work on himself. I've been backed up and busy beyond this year.

So the credit and thanks goes to Mopar, not me.

Typical Doc Al, trying to downplay his role.


Truth be told, we're working together as a team, the Long Island connection, if you will.



It only matters that Sondre's Makitas run as well as they look, for as long as they can. Together, both Doc and I are making sure that happens !!!

 

[Mastermind]

The Long Island Connection.

I like that.

 

[Hinerman]

The Long Island Connection.

I like that.

They made us an offer we couldn't refuse.

 

[RI Chevy]

Yuussse guyz are orsome!

Sent from my SM-G930V using Tapatalk

 

[MustangMike]

You guys are going there with someone named Kevin???

 

[Moparmyway]

You guys are going there with someone named Kevin???

Diversification Mike ............ gotta get with the times bud !!

 

[RI Chevy]

Welcome to the 21st century Mike. LOL [emoji23]

 

[MustangMike]

Hey, I had an Uncle Vito, he went into banking after he retired from boxing! Lived to be 99, was only a month short of 100 (was really a Grand Uncle, my Grandfather's youngest sibling).

 

[Mastermind]

What are the odds????? I found one of Jason's stolen "test covers".

@Redbull661

 

[MustangMike]

Quality like that will always be remembered!

The thought of some of that stuff coming loose and getting into the engine ... my head hurts!

 

[t4driller]

What are the odds????? I found one of Jason's stolen "test covers".

@Redbull661

View attachment 87916

Looks like a flock of sea gulls flew over and dropped a bunch of *s-word on thst muffler. Either your a welder or a grinder... Looks like he's neither...

 

[srcarr52]

What are the odds????? I found one of Jason's stolen "test covers".

@Redbull661

View attachment 87916

Wow, that is just terrible work. Welding aside, if they would have moved the screens a little they could have left no gaps over the holes.

 

[Mastermind]

Wow, that is just terrible work. Welding aside, if they would have moved the screens a little they could have left no gaps over the holes.

Nearly everything this dip chit did was nothing but a flaming chit show.