Show us your tractors

[FergusonTO35]

Thanks, will give it a try.

 

[FergusonTO35]

Thanks, found a couple of posts about it on different forums. Looks like there is only one way the pump drive can go back on the gear that turns it, someone suggested scribing a line from the pump to the engine so it will be in the same timing like you would an ignition distributor.

 

[Steve]

Thanks, found a couple of posts about it on different forums. Looks like there is only one way the pump drive can go back on the gear that turns it, someone suggested scribing a line from the pump to the engine so it will be in the same timing like you would an ignition distributor.

Before you scribe any marks Lance clean the entire area around the pump flange to see if someone has already scribed marks. Took a pump off an engine after I scribed a mark and when I got the super clean pump back from the rebuilders there was a previous scribe too. I figured it out but it was a head scratcher moment.

 

[FergusonTO35]

Thanks pardner, I sure will. Need to get the bush hogging done before it gets out of control.

 

[MG2186]

Here’s a few of ours

 

[thedude74]

 

[FergusonTO35]

Looks like just the thing you need up there!

 

[thedude74]

Looks like just the thing you need up there!

It does pretty good in everything but ice....or if the operator works the same spot too long ripping out stumps and turns the ground to pudding.

 

[Powerstroke Cowboy]

It does pretty good in everything but ice....or if the operator works the same spot too long ripping out stumps and turns the ground to pudding.
View attachment 371976

Yes, depending on the soil and moisture content it becomes almost like quicksand.

 

[thedude74]

Yes, depending on the soil and moisture content it becomes almost like quicksand.

Yeah it's pretty wet in this area. Several inches of topsoil covering tan and grey clays.

 

[Hinerman]

Looks like just the thing you need up there!

It is missing a heated cab...

 

[Loony661]

Love this tractor makes life a lot easier View attachment 371318View attachment 371320
This is right after I bought the hose attachment

What size is your Kioti? I’m assuming you like it if you’re investing in more attachments.. the local CaseIH dealer here in town also sells the Kioti brand tractors. They seem to sell.

 

[backhoelover]

What size is your Kioti? I’m assuming you like it if you’re investing in more attachments.. the local CaseIH dealer here in town also sells the Kioti brand tractors. They seem to sell.

Ck2610. Love that tractor, Frees up alot of time with splitting wood and tilling garden. I bought the backhoe to install drainage line in front yard. Contractor wanted 8500. The backhoe and piping cost be 9700.00 was a no brainier. Also have a box blade, auger, a attachment that lets me pull my dump trailer from the 3 point hitch

 

[Loony661]

Ck2610. Love that tractor, Frees up alot of time with splitting wood and tilling garden. I bought the backhoe to install drainage line in front yard. Contractor wanted 8500. The backhoe and piping cost be 9700.00 was a no brainier. Also have a box blade, auger, a attachment that lets me pull my dump trailer from the 3 point hitch

Are talking about a Heavy Hitch by chance?

 

[backhoelover]

Are talking about a Heavy Hitch by chance?

Yes sir.

 

[Loony661]

Yes sir.

Nice! When Heavy Hitch got started, for a short time I welded them together. I would weld there for 5-6 hours after my regular job as a mechanic at a John Deere dealer.. It was a small pole shed next to the guys mother-in-laws house, tucked up tight into a hill. It was just myself, and a buddy who welded for him full time, and made all the jigs for the hitches. This was roughly 9-10 years ago..

 

[exCanuck]

My 3 Trackers.

 

[exCanuck]

My 3 Trackers.

OH! He said "tractors".

 

[FTG-05]

 

[I saw a lot]

Nothing fancy but was my uncle's baby and my dad and I went to Washington to pick it up after he passed. My dad has passed it on to me so hope to get it pulled out this summer and bring it down here. Should be ready to start right up after getting a battery and fresh fuel for it.
Wonder if there are any loader options for it? Also, sorry for the poor pictures.