Show off your muffler mods

[Moparmyway]

Nice. Does the pipe continue on the inside of the can? What’s the idea with that tach? Very helpful pictures.

No, earplugs are a great alternative to "noise cancellation" that may, or may not work.

The tach just lets me know where the tune is at after warmup, but it also gives me run time hours, tachs give us very important information on several fronts

Lemme know if there is anything else you want pics of .......... where there is a will, there is a way !!!!

 

[ManiacalMark]

View attachment 286183 View attachment 286184
Perfect for the aux oiler on the mill

What brand bar is that?

 

[Moparmyway]

What brand bar is that?

I believe that I got it from someone here, she had a worn out tip, I think it was an Oregon branded Cannon bar.

I cleaned her up, squared the rails, sanded her to bare metal, blued her about 20 times, untill she was black, each time I heated her then neutralized her, then repeated the blueing. After that she got immersed in Lucas 2 cycle oil for a week or two, put a new Cannon tip on her, then ground oil passages for the 3120.

 

[PA Dan]

I believe that I got it from someone here, she had a worn out tip, I think it was an Oregon branded Cannon bar.

I cleaned her up, squared the rails, sanded her to bare metal, blued her about 20 times, untill she was black, each time I heated her then neutralized her, then repeated the blueing. After that she got immersed in Lucas 2 cycle oil for a week or two, put a new Cannon tip on her, then ground oil passages for the 3120.
View attachment 286328 View attachment 286329 View attachment 286330

Wow nice work there![emoji106]

 

[Moparmyway]

Wow nice work there![emoji106]

Thank you kind Sir !!

 

[PA Dan]

Thank you kind Sir !!

I want to set up an auxiliary oiler on my mill.

 

[Kiwioilboiler]

I believe that I got it from someone here, she had a worn out tip, I think it was an Oregon branded Cannon bar.

I cleaned her up, squared the rails, sanded her to bare metal, blued her about 20 times, untill she was black, each time I heated her then neutralized her, then repeated the blueing. After that she got immersed in Lucas 2 cycle oil for a week or two, put a new Cannon tip on her, then ground oil passages for the 3120.
View attachment 286328 View attachment 286329 View attachment 286330

Kevin i just have *s-wordty old oregon powermatch bars, but i'd be super keen to take some bar refurb 101 with ya.

 

[thinair]

Those new roller nose Cannon tips are NOT cheap!

 

[Deets066]

 

[Moparmyway]

Wow nice work there![emoji106]

I want to set up an auxiliary oiler on my mill.

Best thing that you could do, no matter what size you are milling

Kevin i just have *s-wordty old oregon powermatch bars, but i'd be super keen to take some bar refurb 101 with ya.

Those new roller nose Cannon tips are NOT cheap!

One more ......

 

[Moparmyway]

View attachment 286343

 

[srcarr52]

View attachment 286343

 

[Deets066]

Don’t be hating on snaggle tooth customs....

 

[srcarr52]

Don’t be hating on snaggle tooth customs....

Bent member muffler mods?

 

[Maintenance Chief]

I

Best thing that you could do, no matter what size you are milling





One more ......

View attachment 286345

Is that one of the aluminum skid plates on your saw?

 

[Moparmyway]

Yuppers
Saved a tank or two for me, I have them on all of my worksaws

 

[Red97]

Large deflector on an oem 395 jungle muffler.

 

[Thumper88]

Whipped this one up for my 390 on my break at work. 1" pipe.

 

[Thumper88]

Painted and mounted up

 

[PA Dan]

Painted and mounted up

View attachment 289206 View attachment 289207 View attachment 289208

Nice job Jordan!