Saw video thread

[RI Chevy]

@Armbru84
Sounds really stout!
Nice low end grunt.

 

[MustangMike]

Great job Al, I'm gonna have to put the 36" back on mine!!!

Almost sounds like the carb cleared, how long since it has been run?

 

[RI Chevy]

Only a quarter tank. Just the 3 cuts there Mike. I am super psyched!

 

[Armbru84]

@Armbru84
Sounds really stout!
Nice low end grunt.

Thanks, it pulls pretty hard. The wood is still semi froze.

 

[Armbru84]

Figured I might as well run the 395 as well. Not bad. The 084 had square ground chain and the 395 I filed myself.

 

[RI Chevy]

You got some real nice saws there Armbru84!

 

[MustangMike]

Jeff, it is hard to beat the power to weight of a ported 460! They perform well with anything from a 20" to 36" bar, but IMO are ideal with a 24-28" bar. Most of what we encounter around here is in that size range, and I put the 36" on my 066.

Looking forward to seeing your saw at a GTG.

 

[RI Chevy]

I have a new Tsumura 28"LW bar waiting for it. Lol
Thanks Mike.

 

[MustangMike]

Perfect!

 

[trooney]

Thanks, it pulls pretty hard. The wood is still semi froze.

That it does!!!

 

[jk14]

Here's the very first cuts on my brandy new MMWS MS661 w/32" light 3/8" 8pin @33rsl, man this thing is Badass. Sorry the vid. is a little long I had to warm it up a little...

 

[jmssaws]

What do you think about it?
Don't take this the wrong way but I'm jealous of your wood.
I'd love to have some big slick peices like that.
395 looks good to.
3/8 on both?

 

[RI Chevy]

Sounded real good TK! Pulls well and holds RPM'S throughout the cut. [emoji106]

 

[X 66 stang347 X]

Was that the eBay saw? It turned out great.

 

[Armbru84]

What do you think about it?
Don't take this the wrong way but I'm jealous of your wood.
I'd love to have some big slick peices like that.
395 looks good to.
3/8 on both?

I have some big pcs laying around, more to bring home yet. Actually running .404 on each.

I like the 084 for sure. Lots of low end grunt.

 

[Deets066]

 

[Deets066]

 

[Deets066]

 

[Deets066]

Timing is too far, I knew it before but can hear it more now

 

[Deets066]

I do like how well the new carb is behaved