Saw video thread

[jmssaws]

I've done probably 8-10 this year like that. They all went to people active on the forums that do their own repairs and most get a base gasket instead of sealant.

That would be the only way to do it is to know who it is and know that it's put together right incase something happens.

 

[mdavlee]

That would be the only way to do it is to know who it is and know that it's put together right incase something happens.

Yep. Got to be a little selective to who you do that for to keep from a disaster

 

[Brewz]

3 saws I have rebuilt recently
First saw is bog stock 038 running about 160 psi and 12500 RPM
Second is 038 with gasket delete and some port work and muffler mod running 180 psi and 14800 RPM
Third one is my 10mm 044 with gasket delete, some port work and muffler mod running 175 psi and 14800 RPM.

both 038's have identical new 3/8 semi chisel chains
the 044 has 3/8 full chisel.

I ended up doing a bit of work on tuning the ported 038 and got it going better and I recon if it had the same chain as the 044 it would have been close for sure!

 

[Brewz]

A mates 394 I have rebuilt. I kept it mildish as requested by the owner. Light porting and muffler mod to help it along a bit. Running 30" 3/8 full chisel, 180 psi and a bit over 13000 RPM
My 064 built from junk yard parts, ported running 28" 3/8 full chisel, 185 psi and fat at 13500 RPM. I love this saw!

All saws in this video and the one above are running 7 pin sprockets in this dry hard timber.

I didn't realize my daughter was filming me get them tuned up haha

 

[RI Chevy]

Real nice job with the saws mate. They look and sound stout.

 

[CR500]

Did you try those K&N filters yet?

Sent from my non internal combustion device.

 

[MustangMike]

Don't know what kind of wood was in that 1st vid, but the bark looks a lot like our Shag Hickory!

Nice job on the saws. How does the weight of the 038 compare to the 044?

 

[malk315]

A mates 394 I have rebuilt. I kept it mildish as requested by the owner. Light porting and muffler mod to help it along a bit. Running 30" 3/8 full chisel, 180 psi and a bit over 13000 RPM
My 064 built from junk yard parts, ported running 28" 3/8 full chisel, 185 psi and fat at 13500 RPM. I love this saw!

All saws in this video and the one above are running 7 pin sprockets in this dry hard timber.

I didn't realize my daughter was filming me get them tuned up haha

Your daughter was all smiles in that selfie at the end LOL.

Saws sound awesome. Im sure video do them no justice! Someday I'd like to add a 90 cc class saw to the herd.

Sent from my XT1585 using Tapatalk

 

[paragonbuilder]

A mates 394 I have rebuilt. I kept it mildish as requested by the owner. Light porting and muffler mod to help it along a bit. Running 30" 3/8 full chisel, 180 psi and a bit over 13000 RPM
My 064 built from junk yard parts, ported running 28" 3/8 full chisel, 185 psi and fat at 13500 RPM. I love this saw!

All saws in this video and the one above are running 7 pin sprockets in this dry hard timber.

I didn't realize my daughter was filming me get them tuned up haha

Love the sound of that hooskie idling!!!
And your daughter is beautiful. She looks happy hanging with Dad!

 

[malk315]

Love the sound of that hooskie idling!!!
And your daughter is beautiful. She looks happy hanging with Dad!

That caught my ear too Dan. Throaty idle reminds me of my 372.

Sent from my XT1585 using Tapatalk

 

[RI Chevy]

They do sound cool. Nice little rumble. [emoji106]

 

[drf256]

Cus Deluxe 262 in oak with a 20.

Also a very boring first run and tune video that will have you asking firn7 minutes of your life back.

 

[Canadian farm boy]

Cus Deluxe 262 in oak with a 20.

Also a very boring first run and tune video that will have you asking firn7 minutes of your life back.

Man, that's nice. Good work Al.

 

[malk315]

Al you been messin with 262s enough you coming to the dark side? The 026 is the signature MOFO saw but the 262 seems to have peaked your interest.

Sent from my XT1585 using Tapatalk

 

[drf256]

It's a good saw, except for all the different size fasteners and the need to remember loctite.

 

[malk315]

It's a good saw, except for all the different size fasteners and the need to remember loctite.

Cue Jeff on bolt shedding huskies
Just ribbin

My 372 shed two bolts when new. Replaced those and no issues since!

Sent from my XT1585 using Tapatalk

 

[RI Chevy]

Lol. No need to even mention it. Lol
Sounded very fat on the tune. RPM'S? Sounds lie there is much more left in it.

 

[drf256]

It was a bit fat. This one is my personal best. That was at 13,900. They run better fat in the real world and it's safer. That goes for all worksaws in my opinion.

I'm still wondering how they can suck all that air through that little air injection do hickey. I wonder if frogskins will help on the AF cover.

The 262 won't rev like an 036 will. I'm still wondering why. Port geometry is superior to the 036.

Hey, at least they are orange.

 

[RI Chevy]

Lol. Excellent job. Maybe the coil limits upper RPM's?

 

[drf256]

No. it's unlimited.