Saw video thread

[jake wells]

we layed down on it hard that 660 is nice i like the torque curve that is through out the power band.

 

[GoBigBlue1984]

we layed down on it hard that 660 is nice i like the torque curve that is through out the power band.

You'll have to come back up before the G2G and run some others if I can get em done. 036 will prolly be next up. Then the 026. If time permits I'll get to the 365/372 hybrid.


Sent from my iPhone using Tapatalk

 

[jake wells]

You'll have to come back up before the G2G and run some others if I can get em done. 036 will prolly be next up. Then the 026. If time permits I'll get to the 365/372 hybrid.


Sent from my iPhone using Tapatalk

me and ben put a 28'' on that 61 and finished getting the wood bucked up.

 

[jake wells]

the 61 gained some compression yesterday managed 2 tanks on that red oak with ben.

 

[jmssaws]

 

[JT78]

All 3 of those saws sound and run awesome. May be me but the 1st one looked like it was fastest.

 

[RI Chevy]

Nice Jason. I would say the 066 is still king there.

 

[jmssaws]

All 3 of those saws sound and run awesome. May be me but the 1st one looked like it was fastest.

First saw has the best chain.
I didn't time them because they all have different bars and chains.
Just happened to have all 3 warmed up at the same time so I ran all 3.

 

[laslabjohn]

Well just ran one of Jasons saw, well with his numbers anyway. Same as the infamous 24..

I reckon I was a little wrong and I apologize to Jason.. it was a big mixup of what he thought I wanted and what I wanted..

When we talked about infamous 24 he thought i wanted fast when i wanted strong. And I can honestly say at 13500 the saw is very very stout.. when you thought you were going to make it tap out, it seemed to reach for another gear..

Oh yea it was running 28 3/8 full comp 7pin.

HELL OF A SAW JASON..

 

[RI Chevy]

You are running an 024 with 3/8"m

 

[laslabjohn]

No i was referring to the 064 with 24 inch bar.

 

[RI Chevy]

Ahhh. OK

 

[Keith Gandy]

Here r the saws Laslab is referring to fellows. We had a 2 man GTG today!! Lol. It will take me a bit to download all the videos

 

[Keith Gandy]

346xp I ported. Stihl PS 16" chain

 

[Keith Gandy]

MMWS 390XP 28 Cannon Stihl 404 skip

 

[Keith Gandy]

562XP Ported 20" with Oregon LGX

 

[Keith Gandy]

361 John Laslab ported .325 9 pin 390 carb

 

[Keith Gandy]

LASLABS ported 661c 3/8 fullcomp

 

[Keith Gandy]

MMWS 390XP 404 RS

 

[Keith Gandy]

Ported 064/066 28" Stihl RS