Saw video thread

[jmssaws]

 

[Deets066]

346???

 

[X 66 stang347 X]

That thing is angry.

 

[mdavlee]

346???

395

 

[Deets066]

395

Just messin

 

[mdavlee]

Just messin

You guys aren't used to the awesome power of the all orange saws[emoji12]

 

[Wolverine]

You guys aren't used to the awesome power of the all orange saws[emoji12]

New sig quote... ?

 

[drf256]

How high would you want to turn it

I'm more of a work vs. race guy. I liked it at 14700. I'm sure it may be faster a bit higher, but it's safe and not slobbering in the wood at this rpm.

I really can't get it any lower than 14500 no matter how much I open the H needle. It's gonna need the jet drilled to go any lower. Never really had a saw do this to me so far. It's at max fuel flow for the carb.

 

[jmssaws]

346???

Yep,I thought a 346 would be lighter.

 

[X 66 stang347 X]

I'm more of a work vs. race guy. I liked it at 14700. I'm sure it may be faster a bit higher, but it's safe and not slobbering in the wood at this rpm.

I really can't get it any lower than 14500 no matter how much I open the H needle. It's gonna need the jet drilled to go any lower. Never really had a saw do this to me so far. It's at max fuel flow for the carb.

Is it a 460? That saw is a monster for sure. I was wondering what a GTG tune was[emoji16]
I bumped my jet up to a .76 and it's sitting at 14,200 at 7/8-1 out. I really want to go cut and see what the high side is but it's been 85° and my trees are down in the woods. Is Crazy weather and ticks are still out in mid Georgia.

 

[JT78]

So I know y'all tend to like the big saws on here but I wanted to share this monster is 38cc on its first tank and running semi chisel safety chain.

 

[JT78]

This is a Mike Lee 390 wearing a 32 square skip with a 7 pin I put an 8 on it after the video and it was much faster. Been very impressed with this saw Mike builds a really mean saw.

 

[jmssaws]

This is a Mike Lee 390 wearing a 32 square skip with a 7 pin I put an 8 on it after the video and it was much faster. Been very impressed with this saw Mike builds a really mean saw.

Mike is a fantastic builder.

 

[jmssaws]

 

[Keith Gandy]

394 sounds mean!!

 

[smokey7]

That 395 earlier was surper nasty. The 066 and 394 need to go head to heading buck cut race. Its easierto see the cut end. Very strong saystho all of em.

 

[Time's Standing Stihl]

Nice love tap you gave Yeti at the end of the video. Kinda like a good game for keeping up with team orange

 

[jmssaws]

Nice love tap you gave Yeti at the end of the video. Kinda like a good game for keeping up with team orange

The stihl actually feels the fastest but the husky's are smother so that's a lot of it.
The 94 sounds twice as mean but there about the same cut time.
Either will run with the 395,there very close

 

[GoBigBlue1984]

Trying to get some ported saws dialed in for Randy's G2G. First up is my fav. Ported 660. I really like this baby at 98/122-124/82. Tried a couple other things and I feel it runs stronger at those numbers. Squish is .030 and compression is 175. Really opened up the dual port muffler as well. My opinion is they stand to gain quite a bit from it.

24" chisel/skip
Red oak

 

[GoBigBlue1984]

Trying to get some ported saws dialed in for Randy's G2G. First up is my fav. Ported 660. I really like this baby at 98/122-124/82. Tried a couple other things and I feel it runs stronger at those numbers. Squish is .030 and compression is 175. Really opened up the dual port muffler as well. My opinion is they stand to gain quite a bit from it.

24" chisel/skip
Red oak