Saw video thread

[Slumberjack]

No, I just widened it.

Good. I got one I’m machining here that came on a saw I bought I had to take .050” out of the squish band just to get the exhaust to 105 which ain’t that great. I’ll have to put it on a 350 riser and take total of .047” off the riser since you can’t take that much from the base. Good move not raising it. Good strong 346 should be lower on the exhaust

 

[Slumberjack]

Down where? Unless you are in Alaska I'm north of ya...
Not sure what you mean by once every thousand years snow? If anything this is a low snow year.
Not looking for sympathy, 40 below has been a normal winter thing for the last 19 years. I've had that hat for 18 of them... Lol

See I think he thought you were me because I just built a saw like yours and ported it lol I’m in the coastal region of LA.

 

[stihl_head1982]

Down where? Unless you are in Alaska I'm north of ya...
Not sure what you mean by once every thousand years snow? If anything this is a low snow year.
Not looking for sympathy, 40 below has been a normal winter thing for the last 19 years. I've had that hat for 18 of them... Lol

Not talking to you sir. Thanks for answering though. It makes perfect sense.

 

[Slumberjack]

Not talking to you sir. Thanks for answering though. It makes perfect sense.

Now that we’re all caught up. Lol I’m about to burn some wood I’ve already cut because we have no power or running water from the once every 1000 year freeze we have going on lol

 

[Slumberjack]

No thread on this one. Grabbed a bunch of parts off the shelf on a Sunday night before night shift and fired it together. Might have to put one together. Hyway Nikasil popup kit, ported, late 266 carb, top cover is some aftermarket junk that didn't fit the 272 I bought it for...

The 266/272 I just built I machined and ported all OEM except the meteor piston.

 

[Agent Smith]

Now that we’re all caught up. Lol I’m about to burn some wood I’ve already cut because we have no power or running water from the once every 1000 year freeze we have going on lol

You have a wood burner?

 

[Slumberjack]

You have a wood burner?

Nope we just gonna chill outside by the fire lol

 

[Ronie]

Good. I got one I’m machining here that came on a saw I bought I had to take .050” out of the squish band just to get the exhaust to 105 which ain’t that great. I’ll have to put it on a 350 riser and take total of .047” off the riser since you can’t take that much from the base. Good move not raising it. Good strong 346 should be 107-108 exhaust

This one was 106, measured with a ring and without the gasket.

 

[Slumberjack]

This one was 106, measured with a ring and without the gasket.

When you machine it you can drop it some

 

[huskihl]

 

[huskihl]

 

[huskihl]

Was a 257. Complete rebuild. New Nachi bearings, 262 cylinder and Meteor piston.
Seems like a turd after watching those last 2 lol.

 

[RI Chevy]

Nice job Kevin. They run nice.

 

[huskihl]

 

[RI Chevy]

Much better bar size for the 262. [emoji106]

 

[huskihl]

Much better bar size for the 262. [emoji106]

He’s in Montana so I’m guessing it’ll have a 24 on it

 

[RI Chevy]

Should be perfect! [emoji106]

 

[davidwyby]

@Ronie @huskihl noice!

stoked on this pretty @blsnelling 2252 that just arrived from @chipper1

Good old dry hard Euc. I have since put it in green tamarix and it's quick. Ordering a rim to go 3/8".

Gonna go back out and make a cut with the ole 2050
and compare.


@cuinrearview thanks for the 50cc push

 

[Slumberjack]

Wow I hope to have one running like that one day!

 

[Slumberjack]

Is that round or square filed chain? I see when the chain is done right you can put pressure on it and the saw keeps eating!