Saw video thread

[RI Chevy]

True. Just going by what I am told. A little different than the traditional hybrid. Different numbers.
Built for more torque.

 

[MustangMike]

Lots of factors to consider, like raker depth, tooth angle, etc.

But Deets, you can send your saw and we will let Mason run it … and Run it, … and Run it …

Care to share your #s?

 

[RI Chevy]

[emoji15][emoji3061][emoji2957] huh?

 

[paragonbuilder]

Lots of factors to consider, like raker depth, tooth angle, etc.

But Deets, you can send your saw and we will let Mason run it … and Run it, … and Run it …

Care to share your #s?

He already did that
Lol
We had it here Mike.
Plus his numbers won’t give you what you need to duplicate it

 

[huskyboy]

He already did that
Lol
We had it here Mike.
Plus his numbers won’t give you what you need to duplicate it

Dan how did it compare to your ms460? Jeff’s 460 was a tick faster than your 460.

 

[paragonbuilder]

Dan how did it compare to your ms460? Jeff’s 460 was a tick faster than your 460.

Spanked it!
With a 28” bar.
Longest I had at the time.
And the more I turned it up the faster it was.
I was afraid to go past 16k
But that was 3 years ago...
[emoji41]

 

[Deets066]

Lots of factors to consider, like raker depth, tooth angle, etc.

But Deets, you can send your saw and we will let Mason run it … and Run it, … and Run it …

Care to share your #s?

This....

He already did that
Lol
We had it here Mike.
Plus his numbers won’t give you what you need to duplicate it

 

[RI Chevy]

Big difference between work saw and race saw...

 

[huskyboy]

Deets does your hybrid have a 046 D cylinder or a normal hemi cylinder?

 

[RI Chevy]

Deets Hybrid is a freak!!!

 

[Armbru84]

Ya’ll need to make it to randys gtg where we can have east coast vs the world for racing...

I will donate the loops of chains even.

 

[Duane(Pa)]

Ya’ll need to make it to randys gtg where we can have east coast vs the world for racing...

I will donate the loops of chains even.

If anyone loses a race, it can be blamed on moonshine or bad gas, elevation, solar flares, slipped on a cow pie, etc.

 

[Deets066]

Big difference between work saw and race saw...

Not here. I’ve used that hybrid to fell at least 50-60 trees. And cut endless amounts of firewood. All I did was cut the dogs off, remove maxflo and choke.

 

[Deets066]

Deets does your hybrid have a 046 D cylinder or a normal hemi cylinder?

Early D

All D’s are not created equal, nor should they be ported as they are.

 

[RI Chevy]

Not here. I’ve used that hybrid to fell at least 50-60 trees. And cut endless amounts of firewood. All I did was cut the dogs off, remove maxflo and choke.

So its a dedicated race Hybrid now....lol

 

[Deets066]

So its a dedicated race Hybrid now....lol

Dedicated race, until I take 5 min to put the choke and filter on

 

[RI Chevy]

Pocket racer then
Lol

 

[Deets066]

Still has the 17b carb on it. Never even drilled the jet

 

[RI Chevy]

The testing that Mason and I do are strictly for work saws. Nothing more. We do time them, but we tune them with a work tune and set them up as a work saw.
No real race of any kind. Just timed cuts for comparative purposes. Usually box chain used.
Just to clarify any questions.

 

[paragonbuilder]

Still has the 17b carb on it. Never even drilled the jet

And what are you waiting for?