RPM In The Cut

[Wanab]

Just wondering what different saws are seeing. What's good, bad, better, best?

I am curious to what a stock 660 turns.

 

[Wonkydonkey]

I think thoughts have changed a bit over the yrs..
blunt vs sharp,
chip thickness,
smooth cutting,
angles of teeth!
Hard vs softwood,
sq ground/filed vs round filed, as well as Semi chisel vs full chis
Then you can add skip, semi or hyper skip.

these all change cutting speeds in the wood.

i will be interested to others thoughts on this, but once you go over 11/12k in the cut it don’t seem to cut any faster. There are other ways to eat through the log with some of the things is listed above.

 

[huskihl]

Stock 90cc are usually 8.5-9k with a brand new chain on a 24” bar. Woods ported can be 11-12k

 

[cus_deluxe]

@fabz knows all about rpms in da wood.

 

[P.M.P.]

@fabz knows all about rpms in da wood.

I think your wrong let's bring in the experts here @RI Chevy, @MustangMike @huskyboy

 

[P.M.P.]

Just wondering what different saws are seeing. What's good, bad, better, best?

I am curious to what a stock 660 turns.

What's yours turning 6000 maybe 7000

 

[Wanab]

What's yours turning 6000 maybe 7000

Depends on the saw. What saw would you be referring to. Most are between 10-12K.

 

[Woodpecker]

Depends on the saw. What saw would you be referring to. Most are between 10-12K.

I guess it depends on if your talking in the cut or just for making pïss rev videos. Me personally I think you should be worried about in the cut… You know where the work actually gets done.

 

[huskyboy]

I think your wrong let's bring in the experts here @RI Chevy, @MustangMike @huskyboy

@Wonkydonkey summed it up pretty good.

 

[RI Chevy]

I think your wrong let's bring in the experts here @RI Chevy, @MustangMike @huskyboy

Wow buddy. You don't quit.

 

[spencerpaving]

So anything over 10k-12k and bigger gears don't cut wood faster?...... interesting

 

[cus_deluxe]

So anything over 10k-12k and bigger gears don't cut wood faster?...... interesting

Better send all those 15 tooth sprockets back.

 

[MustangMike]

How have you been Bret? Hope the Holidays are going well for you.

 

[MustangMike]

Wow buddy. You don't quit.

I was going to say, someone seems to have a problem! Not sure why.

 

[spencerpaving]

I

Better send all those 15 tooth sprockets back.

I guess I should... apparently I was doing things all wrong...lol

 

[spencerpaving]

How have you been Bret? Hope the Holidays are going well for you.

Doing well Mike....I miss the gtgs and seeing everyone.... hopefully the upcoming year will be better ....

 

[Woodpecker]

Better send all those 15 tooth sprockets back.

Fake news

 

[Woodpecker]

I think your wrong let's bring in the experts here @RI Chevy, @MustangMike @huskyboy

That’s mean Gunner… you should go slam your dik in a door or sumptin

 

[MustangMike]

Yea, ditto on that! I really hope they do return. In addition to seeing everyone, the image of you running one of your bike saws is stuck in my mind!

 

[cus_deluxe]

That’s mean Gunner… you should go slam your dik in a door or sumptin

But...he does that for fun...wouldnt be much of a punishment.