Redlinefever husky 394 build

[Whitty21]

I m interested in the p/n of the k&n filter if you find it

 

[redlinefever]

I m interested in the p/n of the k&n filter if you find it

Will do the one on madsens site isn't what I'm looking for needing to do more research and find it again

 

[srcarr52]

OEM high top filters flow plenty and filter very well. I would use anything else.

 

[Wolverine]

OEM high top filters flow plenty and filter very well. I would use anything else.

Agree’d. Mine came w/ the low cover and I greased around the intake elbow, ran it and found it didn’t seal for chit. I like the clamp style filter.

 

[cus_deluxe]

Agree’d. Mine came w/ the low cover and I greased around the intake elbow, ran it and found it didn’t seal for chit. I like the clamp style filter.

Its interesting, that same filter is used on several models, all the way down to the 262. Seems to flow well and filter well for that application, but does seem like it must be a stretch for a 90cc saw.

 

[cus_deluxe]

272’s used that filter as well.

 

[TreeLife]

I love 394s!

 

[huskihl]

View attachment 99021

Bout time. Jeez

 

[huskihl]

View attachment 99021

It's a good thing that's not a muffler cover. Somebody might steal it

 

[Moparmyway]

Bout time. Jeez

It's a good thing that's not a muffler cover. Somebody might steal it

 

[Moparmyway]

does seem like it must be a stretch for a 90cc saw.

I watch as the top distorts and gets sucked down as the throttle opens. A better flowing air filter could probably help a little.

 

[redlinefever]

I think I'm going to try a kn with a outerwear on it

 

[Wolverine]

Its interesting, that same filter is used on several models, all the way down to the 262. Seems to flow well and filter well for that application, but does seem like it must be a stretch for a 90cc saw.

For me it was a no-brainer since I planned to mill, which produces lots of fine dust. The hd elbow was a beech to find.

I think I'm going to try a kn with a outerwear on it

Please share the source/PN.

 

[redlinefever]

Will do when I find it !!! I just like the idea of a filter that u can completely clean also

 

[Moparmyway]

My new 395 on top
Doc Al’s 395 @drf256
Sondre’s 395 @SOS Ridgerider
My 394
Mastermind 395
394 w/JMS cylinder @paragonbuilder

I doubt that I’ll get the time to run them this weekend .........hopefully soon

 

[SOS Ridgerider]

View attachment 99237 My new 395 on top
Doc Al’s 395 @drf256
Sondre’s 395 @SOS Ridgerider
My 394
Mastermind 395
394 w/JMS cylinder @paragonbuilder

I doubt that I’ll get the time to run them this weekend .........hopefully soon

Dang! That’s a lot of orange Kevin.
No rush on my end. I won’t even be stateside until the second week of January. No rush after then either.
Looks like I’ll have to get a new sticker for the starter cover on mine. The rest of the saw looks so good now. Lol

 

[paragonbuilder]

View attachment 99237 My new 395 on top
Doc Al’s 395 @drf256
Sondre’s 395 @SOS Ridgerider
My 394
Mastermind 395
394 w/JMS cylinder @paragonbuilder

I doubt that I’ll get the time to run them this weekend .........hopefully soon

It made it out of the box...[emoji33]


Sent from my iPhone using Tapatalk

 

[huskyboy]

View attachment 99237 My new 395 on top
Doc Al’s 395 @drf256
Sondre’s 395 @SOS Ridgerider
My 394
Mastermind 395
394 w/JMS cylinder @paragonbuilder

I doubt that I’ll get the time to run them this weekend .........hopefully soon

You are lucky!!!!!!! That's a nice bunch of orange there!

 

[huskyboy]

For me it was a no-brainer since I planned to mill, which produces lots of fine dust. The hd elbow was a beech to find.


Please share the source/PN.

They are impossible to find those filter necks. I ended up modifying a 395 one to work. Drilled the screw holes out bigger and clearanced the plastic around bolt heads so they'd seat. Seems to work well. Then I ended up finding a 394 elbow after I did all that work lol. If it fails I'll swap on the 394 elbow.

 

[Onan18]

HOORAY 394/5!!!!!!!!!!!!!!!

P.S. @Moparmyway Your parts are on the way sir.