Rebuilding The JMS 064

[Jon1212]

Man that stuff is a pain to put in. I made an adapter to fit the end of the hose and use compressed air to help get it on

Awkwarrrrddd!.....

 

[Keith Gandy]

Look at this on eBay http://www.ebay.com/itm/222611324456

 

[Jon1212]

Look at this on eBay http://www.ebay.com/itm/222611324456

I read on the internet that the seller also does irrigation trenching with a chainsaw.

 

[GCJenks204]

It just baffles the crap out of me that the port work can be so good, and EVERYTHING else is crap!!!

I'm starting to suspect a twin locked in the attic! There is just something not right about this whole thing.

It suspect he does the grinding straight and then once he's done gets high and finishes the rest out of his tree.

 

[TreeLife]

That steel tag is probably held on with 3m tape

 

[Redfin]

Fair enough Brad. I'll fire it up tomorrow and make sure it oils ok.

If not I'll run over it with the bush hog.

Maybe bash it off a log?

 

[TreeLife]

Yeah, smash that saw again.

 

[Mastermind]

The way I see it......Jason made his customer so fustrated that bouncing the saw seemed like a better idea than trying to deal with him again.

I get it.

 

[Time's Standing Stihl]

Randy those rivets ain't a big deal. I could always put those on later. You and the fellas here have done more than enough. That plate ain't goin anywhere, whatever he glued it on with holds strong.... I tried to peel it up and couldn't.

You run this saw yet Brad?

 

[Manofstihl066]

You run this saw yet Brad?

Not yet bud. He got her all back together, but the clutch was a little to worn to release properly. Our only option was to order a new one.

 

[Time's Standing Stihl]

Well maybe you will get to run it at the gtg?? Hopefully...

 

[Manofstihl066]

Well maybe you will get to run it at the gtg?? Hopefully...

That'd be cool. Here's a pic he sent me the other day.

 

[Mastermind]

Well maybe you will get to run it at the gtg?? Hopefully...

Yeah.......it will be ready.

I just got the clutch and drum a few days ago. It runs great........but the chain wouldn't stop spinning at idle. I tried new springs, then different springs, then without the washer........nothing helped.

So.......I just ordered a new clutch, and a new drum. OEM of course.

 

[Lightning Performance]

Yeah.......it will be ready.

I just got the clutch and drum a few days ago. It runs great........but the chain wouldn't stop spinning at idle. I tried new springs, then different springs, then without the washer........nothing helped.

So.......I just ordered a new clutch, and a new drum. OEM of course.

Were the spring pockets all bagged out where they ride in the shoe?

 

[Mastermind]

Were the spring pockets all bagged out where they ride in the shoe?

Not nearly as badly as some I've seen that worked well.

 

[trooney]

lube the bearing... make sure it aint sticking in there causing the clutch to spin. Been there done that....

 

[Time's Standing Stihl]

Yeah.......it will be ready.

I just got the clutch and drum a few days ago. It runs great........but the chain wouldn't stop spinning at idle. I tried new springs, then different springs, then without the washer........nothing helped.

So.......I just ordered a new clutch, and a new drum. OEM of course.

Lol, that's the same issues I had with that topend I got from you for my 64.

A new Clutch still didn't fix it. ...

 

[Mastermind]

Lol, that's the same issues I had with that topend I got from you for my 64.

A new Clutch still didn't fix it. ...

Strange.

 

[Time's Standing Stihl]

Strange.

Put 10 different clutches, took the washer on and off, Different Bearings and still nothing. Changed a few carbs out and still nothing changed.

@srcarr52 ended up changing the pop off pressure at the Iowa gtg and fixed it

 

[Mastermind]

Put 10 different clutches, took the washer on and off, Different Bearings and still nothing. Changed a few carbs out and still nothing changed.

@srcarr52 ended up changing the pop off pressure at the Iowa gtg and fixed it

Shaun is a smart feller.