Post up your ported cylinder Artwork

[paragonbuilder]

Here is the 288 I built myself a while back.

View attachment 32985

View attachment 32986
View attachment 32987 View attachment 32988

Nice work Shaun!


Sent from my iPhone using Tapatalk

 

[jmssaws]

If it ain't broked.......fix it till it is? LOL

That's my motto.
If it's working right then something must be wrong.

 

[Lightning Performance]

This is one of the best threads I have ever seen on the net! It has nothing just nothing to do with the pictures.

This is a good thread; looking at artwork from the pros gives me something to work toward!

This this might be good news or bad news for you but, your there man.

very nice work in here!! Really makes me want to get my garage built, so I have a place to do some work!!

Yes me to because I'm leaving the building I'm in ASAP a year or so and moving to my back yard, home. I will never rent again for my own shop! I'll move if I need to get bigger. No more partners either. Just discovered my favorite old old Foredom and hand piece are gone, stolen I think. It was stored away on back room shelf.

Here is the 288 I built myself

Your work always speaks for itself. We need 10,000 more of you everywhere.

Great place. Thanks to Bruce for the OPE and doing his best to bring us better quality parts.
I'll thank Randy, is that 3 or 13 hummm, for recommending this to HLS and every active member for just "Keepin' it REAL"

Ya'all really do do some nice damn work and steer others toward quality builds with well researched intelligent info.

 

[drf256]

This is one of he best threads I have ever seen on the net! It has nothing just nothing to do with the pictures.
This this might be good news or bad news for you but, your there man.


Yes me to because I'm leaving the building I'm in ASAP a year or so and moving to my back yard, home. I will never rent again for my own shop! I'll move if I need to get bigger. No more partners either. Just discovered my favorite old old Foredom and hand piece are gone, stolen I think. It was stored away on back room shelf.


Your work always speaks for itself. We need 10,000 more of you everywhere.

Great place. Thanks to Bruce for the OPE and doing his best to bring us better quality parts.
I'll thank Randy, is that 3 or 13 hummm, for recommending this to HLS and every active member for just "Keepin' it REAL"

Ya'all really do do some nice damn work and steer others toward quality builds with well researched intelligent info.

Anytime FrankBierce responds, I have to look because of his avatar.

 

[exCanuck]

I like that WD-40.

Watch it. He has a rubber band on his bench too.

 

[Mastermind]

Watch it. He has a rubber band on his bench too.

Well played sir.......

 

[Postrip]

A few pictures of the porting I done inside my piped 395xp.
It's a strong runner!

 

[Postrip]

The 395xp nearly ready 2 rumble!
These were taken several months back, the saw has raced since then

 

[mdavlee]

Looks slick. Exhaust about 90-95° on that cylinder?

 

[Postrip]

Looks slick. Exhaust about 90-95° on that cylinder?

Yes sir!

 

[Keith Gandy]

064/066

 

[paragonbuilder]

064/066View attachment 33985View attachment 33986 View attachment 33987View attachment 33988

Nice work Keith


Sent from my iPhone using Tapatalk

 

[Redfin]

Looks great Keith.

 

[Mastermind]

The 395xp nearly ready 2 rumble!
These were taken several months back, the saw has raced since then
View attachment 33981

How did it so for you?

Port work looks slick.

 

[mdavlee]

Yes sir!

I just ported a 394 yesterday and was guessing from how tall the port was compared to that one I did. It was 97.5-98 120. It's running with my 660 so I'm pretty tickled with it.

 

[srcarr52]

I just ported a 394 yesterday and was guessing from how tall the port was compared to that one I did. It was 97.5-98 120. It's running with my 660 so I'm pretty tickled with it.

If it's running with your 660 you need to grind on it some more.

 

[mdavlee]

If it's running with your 660 you need to grind on it some more.

Maybe. Took 2 tries to catch it. I used to be able to beat the 66s easily with a 394/5. Now not so much.

 

[Postrip]

How did it so for you?

Port work looks slick.

It ran very well, actually won its 1st race, I was pretty stoked!

 

[jmssaws]

Maybe. Took 2 tries to catch it. I used to be able to beat the 66s easily with a 394/5. Now not so much.

I can easily beat my 395 with a 066.
I use to not be able to get close but thins change, if I ported 395's everyday I'm sure I could build a stronger one but I dont,I port 066's everyday

I whish I could make a 660 run like a 066 or 064/066.

 

[mdavlee]

The 660s I've done were equal to the 066 with aluminum flywheels.