Post a pic of your favorite dirty worksaw

[Stihlsmoking]

ms360 pro my saws don't stay dirty too long now since I got an air compressor, like to clean and touch up chain so I'm ready next time. Trying to make it a habit.

 

[backhoelover]

Love this song, thanks for bringing it back up!

i remember when that song came out. good times then

 

[Locust Cutter]

That was shortly after purchasing the 562. It has a bit less paint on the bar now and a few more scuffs. I may be a PSP but more like Ported Saw Punisher, as mine are expected to do work, but generally get cleaned that week, if not that day.

 

[jake wells]

 

[Stihlsmoking]

This may be my next favorite dirty work saw ?

Hope jug is salvageable ? Recent barn find but I think it'll clean up and be a runner.

 

[fearofpavement]

Wow, pretty major meltdown. Pull it apart but don't get too high of expectations on the cylinder...

 

[Deets066]

 

[Deets066]

Just mounted the hardline today

 

[Deets066]

View attachment 32476

The other side looks like brand new though

 

[MyUsername]

I thought this was a dirty saw thread....not a sparkly gleaming brand new lookin saw thread
.....pics have been 50/50

 

[Stump Shot]

Put these on stack of lumber to make room in the wood shed. Looked like they were trying to strike a pose. Usually laying on a pile of wood in the shed, but it's stacked to the ceiling this year.

 

[mdavlee]

I missed a picture tonight of the 562 in the grapple on the tractor.

 

[concretegrazer]

I missed a picture tonight of the 562 in the grapple on the tractor.

Riding there is how bad things happen

 

[Wolverine]

Sure would like to run said 562 Mike.

 

[mdavlee]

Riding there is how bad things happen

View attachment 32434

Yep. I almost lost it down the hill. Had to stop and tie it in

 

[jake wells]

I thought this was a dirty saw thread....not a sparkly gleaming brand new lookin saw thread
.....pics have been 50/50

ok wise guy your turn.

 

[jmssaws]

I generally use someone else's saw for work,this one is a fabulous falling saw.

 

[CR500]

I generally use someone else's saw for work,this one is a fabulous falling saw.
View attachment 32503

You can be honest....you miss it lol

Sent from my non internal combustion device.

 

[jmssaws]

You can be honest....you miss it lol

Sent from my non internal combustion device.

Strong saw but in a different way,my 064 and 066's are smooth but in a violent and unforgiving way,the 661 is a much more forgiving saw for falling.
They feel more clumsy and are much heavier but If I cut again for a living a 661 would be what I used.

 

[CR500]

Strong saw but in a different way,my 064 and 066's are smooth but in a violent and unforgiving way,the 661 is a much more forgiving saw for falling.
They feel more clumsy and are much heavier but If I cut again for a living a 661 would be what I used.

Plus a good set of heated handles never hurts anything lol...I can not wait to compare the 064 to the 661

The violent powerband should be nice to get used to. The 661 is broad for sure.

Sent from my non internal combustion device.