Muffler mod pictures

[cgraham1]

For my 2165...

 

[bikemike]

View attachment 40821View attachment 40822muffler mod I did on a 359 xp. I trimmed the tabs off of the deflector and put 5 tack welds to hold it on. There's 2 7/16 holes I drilled under the deflector.

Homelite zip baffle ?

 

[t4driller]

Homelite zip baffle ?

Good possibility. I had a bunch of NOS homelite parts. I put a couple deflectors in a box 2 years ago or so and this was the last one I had.

 

[Drptrch]

What are you using for screen ?

 

[t4driller]

What are you using for screen ?

It was on the deflector. But it's just a thin piece of metal with 1/8 inch holes in it.

 

[stihlman441]

First attempt at a muffler mod. It's my ms241. I'm happy the way it turned out, it was a little beast before now it's a monster.


Sent from my iPhone using Tapatalk

Looks good
I will bet if its a stock saw it will know run richer.

 

[BigRed96]

Here is one I did on an 036 I just finished rebuilding. I used a Husqvarna deflector that I cut down. I then cut the plastic around so it wouldn't melt. Plastic were already melted a bit with the stock muffler.
http://s118.photobucket.com/user/Timmy1980/media/Mobile Uploads/IMG_0702.jpg.html][/URL]
%5BURL=http://s118.photobucket.com/user/Timmy1980/media/Mobile Uploads/IMG_0700.jpg.html][/URL]

 

[ferris]

Looks good
I will bet if its a stock saw it will know run richer.

Is that good that the saw run richer?
richer as normal?

 

[Isaac]

Looks good
I will bet if its a stock saw it will know run richer.

I hope not. It was rich before. I figured the mtronic would compensate. So far so good, the saw is pretty stout. No extra splooge coming from the muffler. Only thing is, if you are limbing small stuff for a while it gets quirky like it wants more wood. Put it in some 16" stuff and it's off to the races.


Sent from my iPhone using Tapatalk

 

[Isaac]

Not bad for a stock saw and a muff mod. Even has a safety chain on it still. Ps, hope the vid works I've never posted one before.


Sent from my iPhone using Tapatalk

 

[bikemike]

Not bad for a stock saw and a muff mod. Even has a safety chain on it still. Ps, hope the vid works I've never posted one before.


Sent from my iPhone using Tapatalk

362?

 

[Isaac]

362?

241 cm

Forgot to mention, that's half of a seasoned white oak crotch.


Sent from my iPhone using Tapatalk

 

[frag-88]

 

[Redfin]

 

[jeepsnchainsaws]

 

[bikemike]

View attachment 41460 View attachment 41461

Still have it? still run? we all need a vid of the Lil guy bet it probably is a Lil quiter too

 

[jeepsnchainsaws]

Still have it? still run? we all need a vid of the Lil guy bet it probably is a Lil quiter too

Yep, still have it. I use it more than my others. It is a clutch killer, I am on my third set of shoes!

 

[DexterDay]

View attachment 41457 View attachment 41458 View attachment 41459

More is gooder!!!

I have a tri-port on my MS 460. Sounds and runs great!

 

[Chris Zautner]

View attachment 41457 View attachment 41458 View attachment 41459

That's a awesome looking muffler mod. Makes me want to buy a 661 just so I can have a muffler mod like that.

 

[bikemike]

View attachment 41457 View attachment 41458 View attachment 41459

Do you run that after the baffle was cut out with the stock exit port only? any gains in just the baffle gone