Muffler mod pictures

[Redfin]

Do you run that after the baffle was cut out with the stock exit port only? any gains in just the baffle gone

There is a gain with just enlarging the original port. More to be had with losing the baffle. I may have gone to far with this one but will be easy to fix.

It does sound nasty with a triple.

 

[dustinwilt68]

Here is an 044 I did today, used a husqvarna 288 set up with the factory screws and spark arrestor, fig best way to get a stihl to run is to put husqvarna parts on it.lol, sorry couldn't resist, I love them booth honest.

 

[czar800]

This is a 346 I’m tinkering with.

 

[czar800]

I Didn’t have time to weld it on this evening.

 

[RI Chevy]

Should give a cool sound out of the pipe.

 

[odin]

This is a 346 I’m tinkering with.


View attachment 137825


View attachment 137826

Is that nothing but a stub of EMT?? Always curious what guys use for tubing. Didn't know if conduit could hold up to the heat.

 

[czar800]

Should give a cool sound out of the pipe.

Huskies need all the help they can get...

 

[czar800]

Is that nothing but a stub of EMT?? Always curious what guys use for tubing. Didn't know if conduit could hold up to the heat.

Yep it’s just Good old galvanized EMT.

It’s a real treat to weld....

 

[RI Chevy]

Sucks to weld. EMT is much thicker and harder than the Muffler. Tough to get right heat without blowing out the thin muffler metal.

 

[czar800]

Sucks to weld. EMT is much thicker and harder than the Muffler. Tough to get right heat without blowing out the thin muffler metal.

Especially when your a hack like me.

 

[Czed]

372 and 2165 trying different designs
Cut out 1/2 inch from the inner tubes.
Run great

 

[czar800]

Btw I picked the size and shape because that’s where the biggest dent was.....

#whoneedsadentpuller.....

 

[huskyboy]

372 and 2165 trying different designs
Cut out 1/2 inch from the inner tubes.
Run great
View attachment 137828 View attachment 137829 View attachment 137830

I set the wood smoking last time I tried that on a saw . That was the last time I did that for a work saw.

 

[Isaac]

Muffler for an 025. Stock version of a ms210 on the right for comparison.

 

[Moparmyway]

I dont like any muffler outlet that directs the exhaust at the wood.
Besides the risk of catching fire, the saw and operator are taking in exhaust spew.
Sucking exhaust in, whether it be the saw or the operator, just isnt good.

 

[tickbitintn]

Noise bounces off wood and straight back at you as well....
#oldanddontlikeloud
Lol

Sent from my XT1635-01 using Tapatalk

 

[Wolverine]

But straight out is the fastest..

 

[Czed]

80.00 ebay
For those that don't mod they own
Reminds me of motion detector light's

 

[460 magnum]

This is a 346 I’m tinkering with.


View attachment 137825


View attachment 137826

I did kinda the same thing with a little husky 51... Sound pretty cool.

 

[460 magnum]

Do you run that after the baffle was cut out with the stock exit port only? any gains in just the baffle gone

@redbull has really good videos on this