McLuvin’

[huskihl]

Oh boy. Here we go...
Ding, ding... Dallas spoke highly of me....I can tell...
Not sure why your doubting the hardness of the wood in my vids...‍
If you feel you must, then ok...

Don’t believe Dallas has ever spoken of you to me, let alone poorly.

I just want some of that good cutting maple that grows out there

 

[RI Chevy]

I'll try and cut a few of those maple trees and bring them to you GTG on a trailer. [emoji106]

 

[huskihl]

I'll try and cut a few of those maple trees and bring them to you GTG on a trailer. [emoji106]

That would be cool. Bring lots. They won’t last long lol

 

[RI Chevy]

I'll bring a load of that Aussie Red Gum. We'll all be scratching our heads...lol

 

[Lightning Performance]

I cut some hard chit today. Dead maple, white, rock...whatever you want go call it. In the stove the tops go and you back away from that chit. Burns hot like dry yellow pine. Good bread oven cooking wood.

 

[Lightning Performance]

Just knew this pic taken yesterday would soon come in handy. The fast wet shortbus I was chasing on death hyway norf.

 

[huskihl]

Just knew this pic taken yesterday would soon come in handy. The fast wet shortbus I was chasing on death hyway norf.
View attachment 212436

Behind it is better than still in it

 

[Bigmac]

Just knew this pic taken yesterday would soon come in handy. The fast wet shortbus I was chasing on death hyway norf.
View attachment 212436

You could go faster if you disengage your parking brake!

 

[David Young]

Just knew this pic taken yesterday would soon come in handy. The fast wet shortbus I was chasing on death hyway norf.
View attachment 212436

Ken where’s that video of you with the three 066’s sounds like a dragster at idle

 

[David Young]

Kevin your doing good considering they didn’t give much to work with. You going to mess with the transfers at all.

 

[huskihl]

Kevin your doing good considering they didn’t give much to work with. You going to mess with the transfers at all.

They look decent. Location and direction are good. Makes it difficult to change them much also since they’re so far up in there

 

[Bigmac]

They look decent. Location and direction are good. Makes it difficult to change them much also since they’re so far up in there

She looks good, the timing is nice, like you mentioned more timing or the need in a
Bump in compression. Compression isn’t easy on a clamshell! Nice job

 

[drf256]

Saw looks much betterer Kev. Good work as usual.

Where is squish?

In that saw, a welded popup might work fine. In higher rpm saws, I’ve always wondered weather or not the extra weight would offset any gains the increased compression made.

Did you pull a compression reading just for shiz and goggles?

 

[Al Smith]

If I recall the exhaust on the few I've checked was already at 96 after .So I've been reluctant to raise it up .Actually the only one I ever tinkered with being a 6-10 I only widen the exhaust a little bit .

 

[huskihl]

Saw looks much betterer Kev. Good work as usual.

Where is squish?

In that saw, a welded popup might work fine. In higher rpm saws, I’ve always wondered weather or not the extra weight would offset any gains the increased compression made.

Did you pull a compression reading just for shiz and goggles?

Mark tested compression when he rebuilt it and got 155. I measured squish at .046

 

[Lightning Performance]

Mark tested compression when he rebuilt it and got 155. I measured squish at .046

Oh gawd that screams nitro usage may be applied.

 

[Lightning Performance]

Ken where’s that video of you with the three 066’s sounds like a dragster at idle

The only video on my channel.
Don't be staring....I was an ankle model.

Lee's was more betterer.

 

[David Young]

The only video on my channel.
Don't be staring....I was an ankle model.

Lee's was more betterer.

whats your channel

 

[Al Smith]

[QUOTE="huskihl, post: 976014, member: 360" I measured squish at .046[/QUOTE] Which coincidently is about what most stock Stihls are that I've measured in stock form .

 

[Bigmac]

A welded pop up would be cool, for science and all