HUSQVARNA HUSQVARNA THREAD

[mainer_in_ak]

hi all,
I was offered a husqvarna 2100 cd and was wondering what rpm's yall see on the 2100 when the governor is disabled? This one has the dual exhaust ports that look like mouse ears.

 

[Woodwackr]

hi all,
I was offered a husqvarna 2100 cd and was wondering what rpm's yall see on the 2100 when the governor is disabled? This one has the dual exhaust ports that look like mouse ears.

Don't exceed the specs by much on a stock saw...bad things will happen. Run 40:1 at a minimum, 32, probably better.

Pics?

 

[thedude74]

hi all,
I was offered a husqvarna 2100 cd and was wondering what rpm's yall see on the 2100 when the governor is disabled? This one has the dual exhaust ports that look like mouse ears.

I recently plugged the governor on my 285 CD(small bore 2100). Can't say I put a tach on it but it's nowhere near what my 288 is spinning(13,000)....maybe 10,000 or so if I had to guess.

 

[heimannm]

Long story (on AS) short, I am in need of a coil for a 455 Rancher. PN in the IPL's is 544 04 7001, PN on the coil in the saws (two 455 Ranchers in the shop currently) is 544 04 70-03.

I am looking for options for a replacement coil, recommendations???

Thanks,

Mark

 

[Woodwackr]

Long story (on AS) short, I am in need of a coil for a 455 Rancher. PN in the IPL's is 544 04 7001, PN on the coil in the saws (two 455 Ranchers in the shop currently) is 544 04 70-03.

I am looking for options for a replacement coil, recommendations???

Thanks,

Mark

I have a parts saw with the 01 coil

 

[heimannm]

I was able to find them with Traverse Creek (The Duke), should be here by Monday.

Thanks,

Mark

 

[thedude74]

Added another Husqvarna to the collection yesterday. First mod will be to flip the backwards chain.

 

[ammoaddict]

Added another Husqvarna to the collection yesterday. First mod will be to flip the backwards chain.

Good looking 51.

 

[heimannm]

Just FYI, I received the ignition coil from The Duke and the 455 is once again a runner. I don't know how the electronic ignition module could lose its timing, but while there was a good, strong spark the timing was obviously off. Flywheel key was fine...



Mark

 

[thedude74]

Good looking 51.

Thanks. After I dumped the old fuel and put in fresh mix it fired right up. Its missing the air filter otherwise complete.

 

[Czed]

https://www.amazon.com/Tsmura-Bar-Solid-Sprocket-Tip/dp/B07PWYG68Y/ref=mp_s_a_1_1?crid=3ERY7Z04P3UA8&dib=eyJ2IjoiMSJ9.9kSOcxWvOWnTMVE58hcwhvathWO39balu8oLcG-iBz-t7RdIHwoUocKSOGqOrxsODzARkJn72lZRpa9ZN0XKqHhENx1z6tKABc_tQHHzmrj-neOfPhUfNnLXcFEazlK4sbZqmwgzjW8VtMpuzPYJ5N8cGyIThCADYOWsKeapzr0.CKtAOHteFkFZy54Ef0Cpah-_0STUdd_ivYrv9I9fj6Q&dib_tag=se&keywords=tsumura+32+inch+bar&qid=1720321441&sprefix=32%22+tsu%2Caps%2C167&sr=8-1

Great deal on a tsumura 32"

 

[bigbadbob]

394 cracked case,,,leaks bar oil quickly,

 

[Woodwackr]

394 cracked case,,,leaks bar oil quickly, View attachment 425616

Can’t see the crack…blue *s-word
Ship the case half to srcarr

 

[heimannm]

He tried to seal the crack using Photoshop...

Mark

 

[bigbadbob]

Can’t see the crack…blue *s-word
Ship the case half to srcarr

He tried to seal the crack using Photoshop...

Mark

Thats crack case sealer...

 

[Woodwackr]

Thats crack case sealer...

Not to be confused with plumbers crack spackle.

 

[farminkarman]

How much would you pay for a nice looking 154SE or SG…the saw has working heated handles? I have zero experience with a 154 or 254xp, so I’m not sure what my closest point of comparison would be. Are these essentially the same size as the 257, 261’s, and 262xp?

 

[jacob j.]

How much would you pay for a nice looking 154SE or SG…the saw has working heated handles? I have zero experience with a 154 or 254xp, so I’m not sure what my closest point of comparison would be. Are these essentially the same size as the 257, 261’s, and 262xp?

The 154 was the start of that series and they're good saws. The earliest ones had full-circle single-ring pistons. The anti-vibe is a little stiff but good. They became the 254XP with improvements over time. The series has never been good for resale values, a good used 154/254 these days brings about $225-250. A mint condition survivor might see $300-ish. It would be the SG if it has heated handles and carburetor. I think they also made a version that's compatible with the Nordfeller system.

 

[Squareground3691]

Good little old school,

 

[Woodwackr]

Has anyone tried the new Hyway “big-bore” kit for the 390xp?

Hyway Big Bore POP UP cylinder piston kit for Husqvarna 390XP 385 Jonsered 2188 | eBay

Fits Husqvarna chainsaw models 390 390xp 385 385xp and Jonsered chainsaw models 2188 2186.

www.ebay.com