HUSQVARNA HUSQVARNA THREAD

[Woodwackr]

Shouldn’t need to but a dab of blue sure won’t hurt.

I wonder if the newer “capture” type screws would work on those old mag covers.

 

[Woodwackr]

Post a pic of the 2 you have left.

 

[Jusgunn3]

Post a pic of the 2 you have left.

I suck at taking photos. I actually lost two of the three, I looked again while I was finishing up the tree. I am going to get the metal detector out next!

 

[Woodwackr]

I found some M5x 16mm and 19mm flat heads without washers which is the same screw on my 480 and 2100. (16s).
Also found some newer type as well as the modern t25s.
And 3 with captured flat washers.
Newer capture screws won't work as the bolt holes on these covers are too big.

 

[Woodwackr]

I suck at taking photos. I actually lost two of the three, I looked again while I was finishing up the tree. I am going to get the metal detector out next!

Are the washers loose, captured, flat or lock?

 

[Woodwackr]

The older Stihl flat screws would work fine as well. I don't have much of anything that old anymore.

 

[Jusgunn3]

The washers seem to be loose, I was thinking either captured or lock would be a little better. Thanks for helping with the sizes!

 

[Squareground3691]

Those Husqvarna fastener sets the Duke sells are great to have around, and a killer deal, got the 300 piece one ,

 

[Woodwackr]

Those Husqvarna fastener sets the Duke sells are great to have around, and a killer deal, got the 300 piece one ,

Does it have any of the older flat screws?

 

[Squareground3691]

Does it have any of the older flat screws?

I can’t remember offhand, , it will accommodate a wide range and variety, when you think online retailers want 4-6 dollars for one stinking screw , you get 300 of all types of fasteners for like 70 bucks, I’ve used it extensively ,

 

[qurotro]

It's just a generic M5 screw but I don't know how long.. I've use hex head ones with a washer pulled from other husky carcass

 

[Jusgunn3]

It's just a generic M5 screw but I don't know how long.. I've use hex head ones with a washer pulled from other husky carcass

Good to know, I can measure the one I have and get something that fits.

 

[Woodwackr]

It's just a generic M5 screw but I don't know how long.. I've use hex head ones with a washer pulled from other husky carcass

16mm

 

[Woodwackr]

Good to know, I can measure the one I have and get something that fits.

Unless you care if the saw is 100% OE, any M5x16-20mm will work. Hex head, flat, Philips, torx, doesnt matter.

 

[Woodwackr]

I found a bunch of the screws in that last Pic. Captured washer, m5x16. I can mail you 2 if you can't find something.

 

[Jusgunn3]

I found a bunch of the screws in that last Pic. Captured washer, m5x16. I can mail you 2 if you can't find something.

I appreciate that, I will let you know!

 

[redneckhillbilly]

anybody able to tell what model this is? its up for auction at the local auction house, so far its only bid up to $39, auction ends thursday night.

 

[lehman live edge slab]

anybody able to tell what model this is? its up for auction at the local auction house, so far its only bid up to $39, auction ends thursday night.

Looks like a 61 or maybe 268, hopefully you could get it for cheap. My experiences lately with auctions hasn’t been good people get into bidding wars last day and pay more than it’s worth plus all the fees ect on top of the sale price. I’ve almost quit watching them

 

[hacskaroly]

anybody able to tell what model this is? its up for auction at the local auction house, so far its only bid up to $39, auction ends thursday night.

Just from the pics, I would guess maybe 272 family. At that price I would bid, maybe up to $100, not sure what's going on on the inside.

 

[redneckhillbilly]

I like to wait and see what others bid and at the last minute bid on stuff