HUSQVARNA HUSQVARNA THREAD

[PogoInTheWoods]

I’ve got an old 3-in-1 oil bottle full of mix oil that I use.

I actually use 3-In-One Oil. A little goes a long way. I just finished up a 3 oz. can I inherited with my Dad's stuff 20 years ago. Its only use was for lubing saw bearings and top ends for reassembly -- and conjuring up happy memories.

 

[Woodslasher]

Anyone seen one of these before? It's a 371 dog with the later-style common 372 big dog spike pattern but the early style extra mounting tab.

 

[sawfun]

Is the Husqvarna 38 a true Husky design, or does someone else design it. It kinda looks like a miniature McBrick.

 

[Squareground3691]

Anyone seen one of these before? It's a 371 dog with the later-style common 372 big dog spike pattern but the early style extra mounting tab.
View attachment 341989

Haven’t seen that before,

 

[Partner]

[CYTAT="sawfun, post: 1381409, member: 1076"]Czy Husqvarna 38 to prawdziwy projekt Husky, czy może zaprojektował go ktoś inny. Wygląda trochę jak miniaturowy McBrick.[/QUOTE]
There were 2 versions of this 38 and 38VR chainsaw you have?

 

[sawfun]

[CYTAT="sawfun, post: 1381409, member: 1076"]Czy Husqvarna 38 to prawdziwy projekt Husky, czy może zaprojektował go ktoś inny. Wygląda trochę jak miniaturowy McBrick.

There were 2 versions of this 38 and 38VR chainsaw you have?[/QUOTE]
This one

 

[Partner]

Then you have 38 / see the website mike / I recently watched VR versions available for purchase. Smaller engine sizes were also found in this 35cc and 33cc chainsaw

 

[Partner]

VR 38 I saw the same also Solo

 

[sawfun]

Ok, so it is a Solo design. Thank you. I haven't cut with it yet.

 

[fossil]

Looking at the IPL's of the Frontier saws and the 38 you have, the cylinder, single counter weight crankshaft and slip on rod, it really looks like a reclad Frontier engine.

 

[jacob j.]

Anyone seen one of these before? It's a 371 dog with the later-style common 372 big dog spike pattern but the early style extra mounting tab.
View attachment 341989

I've got several of them. The original style came on the 371 when it was first introduced. Then it was discovered that those spikes/dawgs are too aggressive for the 371/372 style platform
and they were discontinued. They work better on the 385/390, but you have to cut that little tab off.

Those ones are a re-pop from Bryce.

 

[Woodslasher]

I've got several of them. The original style came on the 371 when it was first introduced. Then it was discovered that those spikes/dawgs are too aggressive for the 371/372 style platform
and they were discontinued. They work better on the 385/390, but you have to cut that little tab off.

Those ones are a re-pop from Bryce.

I thought the finish didn’t look factory, thanks for the clarification on that. The big set you sent me is still happily residing on my 372XPW, I really appreciate you hooking me up with them as they’re just what that saw needed.

 

[Squareground3691]

I thought the finish didn’t look factory, thanks for the clarification on that. The big set you sent me is still happily residing on my 372XPW, I really appreciate you hooking me up with them as they’re just what that saw needed.

JJ a great guy to deal with always helpful

 

[heimannm]

Model Profile: 38 (acresinternet.com)

 

[jacob j.]

There were 2 versions of this 38 and 38VR chainsaw you have?View attachment 342072
View attachment 342073 This one

Model Profile: 38 (acresinternet.com)

My aunt had the 33 version for years and it wasn't a bad little saw. Even if you let it sit with fuel in it for a long time, it would start right up.

It came new with a 14" bar.

 

[fossil]

Ok, so it is a Solo design. Thank you. I haven't cut with it yet.

My aunt had the 33 version for years and it wasn't a bad little saw. Even if you let it sit with fuel in it for a long time, it would start right up.

It came new with a 14" bar.

Some of those little clamshell saws are good runners, Nice and light for us geezers.

 

[Partner]

[CYTAT="fossil, post: 1381684, członek: 374"]Patrząc na IPL pił Frontier i 38, które masz, cylinder, wał korbowy z pojedynczą przeciwwagą i poślizg na drążku, to naprawdę wygląda jak odnowiony silnik Frontier. [/CYTAT]
Just take into account that on the Mike website not everything is 100% correct and it happens that the same model designation has an older and newer saw

 

[Squareground3691]

Some of those little clamshell saws are good runners, Nice and light for us geezers.

She rips for a 45 year old

 

[gurwald]

She rips for a 45 year old View attachment 342129

Those are nice saws, small and compact for 77cc.
Mine is a bit newer with rubber antivibes.

 

[Squareground3691]

Those are nice saws, small and compact for 77cc.
Mine is a bit newer with rubber antivibes.

View attachment 342130

Nice